26
RTA10 & RTA15 Series Rotary Tillers 311-252M
7/25/13
Section 4: Maintenance & Lubrication
Bearing On Right End Of Rotor Shaft
Type of Lubrication: Multi-Purpose
Quantity = As Required
13043
22198
Gearbox
(10 Series
With Top Plug Location)
Check oil level in gearbox by unscrewing top vented
dipstick. Wipe oil from dipstick and screw dipstick in without
tightening. Unscrew dipstick and check oil on dipstick. If on
or below bottom level mark, add recommended gear lube
through dipstick hole until oil reaches top mark on dipstick.
Do not overfill. Reinstall vented dipstick and tighten.
Type of Lubrication: Gear Lube 80-90W EP
Gearbox
(15 Series With Side Plug Location)
Check oil every 50 hours of operation. Remove middle oil
plug (see arrow). If oil is below plug hole, then add
recommended gear lube through top plug hole until oil
flows out of middle plug hole. Do not overfill. Reinstall and
tighten oil plugs.
Type of Lubrication: Gear Lube 80-90W EP
13079
Do not
overfill!
8
Hrs
Screw dipstick fully in & then unscrew
to check level. Oil level should be
between the two marks on dipstick.
Add oil if on or below bottom mark.
Do not overfill!
13076
50
Hours
50
Hours
