Rotary Tillers, Standard Tine Rotation
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
78
RTA10 Series
Features
Benefits
American made
Many tillers are imported. American made means better parts availability.
Tractor HP range
17-25 HP
Gearbox Warranty
5 Years on housing, gears, seals, and bearings. shows our confidence in the product.
Working widths
42”, 50”, 58” to meet a wide range of abdications and needs.
6 1/2” Digging depth
For deep soil penetration.
Plate steel upper hitch
Plate steel is stronger than flat bar type hitch
Clevis hitch
Provides additional strength and easy one person hook-up.
Hitch offset capability
Offset by moving lower hitch points and gearbox mount to cover right tire track.
Offset Dimensions
42” Width
50” Width
58” Width
16” - 26” Std.
13” - 29” Max. Right
23” - 19” Max. Left
25” - 25” Std.
18” - 32” Max. Right
32” - 18” Max. Left
29” - 29” Std.
22” - 36” Max. Right
36” - 22” Max. Left
Fits Land Pride Quick-Hitch
Allows for quick and easy one person hook-up. Does not offset with Quick-Hitch.
Adjustable Parking stand
Easy hook-up and storage.
Adjustable Skid Shoes
Control depth with seven adjustments.
Formed and reinforced rear
deflector
Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.
Adjustable deflector allows for various finish results.
4 ‘C’ shaped tines per flange
‘C’ Shaped tines require less HP to move through the ground.
Solid rotor shaft
1 3/4” Solid steel rotor shaft for strength.
15” Rotor swing diameter
For deep tilling and turning the soil over faster.
Double lip seal on rotor bearing
Double lip seal helps keep the dirt out and the grease in.
Fully shielded shear pin or slip-
clutch driveline
Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having
to replace shear-pins.
#80 Drive chain enclosed in oil
bath
Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain cover
Stamped forming gives the chain cover strength.
Rotary Tillers,
Standard Tine Rotation
311-252F continued on next page
6/23/10
