Section 7: Features & Benefits
RBT4596 & RBT45108 Rear Blades 301-205M
1/13/21
29
RBT45 Series
Features
Benefits
Warranty
One year parts & labor. See warranty page for complete details.
96" & 108" Working widths
(2.49m x 2.74m)
Choice of two sizes to pick from. Both sizes handle large capacities.
70-125 hp (52.2 - 93.2 kW) range
Fits a wide variety of tractors.
Cat. 2 and 3
Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to be
used.
Quick hitch compatible
Compatible with Land Pride Quick hitch for easy attachment and removal. Increases
productivity.
Blade angles left and right
up to 45
o
in either direction
(15 positions manually: Center, 7 clockwise and 7 counterclockwise)
(Hydraulically: Any degree up to 45 degrees)
Allows operator to set the blade at the angle of his choice up to 45
o
to move the
desired amount of material with satisfactory results.
Blade offsets left and right up to 35"
(15 positions manually: Center, 7 positions left and 7 positions right)
[Hydraulically: Any position up to 35" (88.9cm)]
Allows the operator to position the end of the moldboard beyond tractor tire and close
to solid obstacles such as fences, buildings and abutments.
Blade tilts up and down up to 15
o
Allows the operator to do simple tasks such as putting a crown in the middle of a road
to making V-type ditches of various sizes.
Fully welded reinforced main frame
Overall mainframe strength is enhanced due to being fully welded.
Heavy-duty pivot assembly
with 4" (10.2cm) solid steel kingpin
1" (2.5cm) Plate steel turntable and 4" (10.2cm) kingpin for handling the high amount
of torque that can be transferred to this area.
Formed 19" (48.3cm) moldboard
with top lip reinforcement
Formed moldboard with 90 degree bent top for additional strength. Tall moldboard
allows for a great deal of material to be moved.
5/16" Moldboard
with 1/4¼" reinforcement
Heavy-duty moldboard to handle loads from 125 hp (93.2 kW) tractors.
Grease zerks at all pivot points
Helps front pivot shaft maintain bind free movement.
Reversible cutting edge
Lengthens blade life by being able to turn cutting edge over and use other edge.
Retractable parking stand
Enables one person hook-up and keeps the mainframe off of the ground.
Skid shoes (optional)
Skid shoes protect moldboard from hitting low-lying obstructions such as manhole
covers.
End plates (optional)
End plates allow the blade to hold material in to drag from one spot to another.
Cylinder cushion valve (optional)
Cylinder cushion valve protects the cylinders and blade from sudden impacts by
allowing hydraulic fluid to escape vs. blowing seals.
Single or dual gauge wheels
(optional)
Gauge wheels position the height of the blade to aid in grading.
Section 7:
Features & Benefits
