
Section 7: Features & Benefits
12/4/18
RCR2660 and RCR2672 Rotary Cutters 312-783M
32
RCR2660 and RCR2672 Models
Features
Benefits
Surpassed rugged
industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
5 Year gearbox warranty
Shows Land Pride’s confidence in gearbox integrity.
110 horsepower gearbox
A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 driveline with 4 plate
slip-clutch
Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in
the blade path. Standard slip-clutch offers convenience over shear-bolts.
Cat. l or ll 3-Point hitch
Allows use on a wider variety of tractors.
Lower clevis type
3-Point hitch
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull
from the tractor’s lower arms, vs. pulling on a single pin design.
Heavy 10 gauge
deck construction
Can withstand more abuse than lighter gauge decks.
1/4" Side panels for
overall reinforcement
Also protects sides from debris being thrown against them from the blades.
Fully welded deck
Robotically welded. Adds additional strength and reduces rust.
Extended front tapered deck
Contains and discharges material better.
Round back design
Allows for more efficient handling and dispersing of material.
9" Deck Height
Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height
Provides for a wide range of cutting conditions.
High cutting capacity
Can cut brushy areas with saplings up to 3".
Full length skids with
replaceable shoes
Full length skids protect side plate structure, replaceable shoes for convenience.
1/2" x 4" Heat-treated
free swinging blades
Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar
Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Round stump jumper
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
High blade tip speed
60" =12,384 fpm and 72" = 14,861 fpm
Rugged laminated tailwheel
Can’t go flat. Choice of single or dual combination.
Chain or rubber shield option
Located on front and rear. Reduces flying debris.
Driveline Holder
Keeps driveline up out of dirt. Easier hook up of driveline.
Section 7: Features & Benefits