Land Pride RCR2596 Series, Operator'S Manual

Page: 52 / 56

48
Section 7: Features and Benefits
RCR2596, RCR2510, and RCRM2510 Rotary Cutters 312-753M
Table of Contents
7/29/20
RCR25 Series
Features Benefits
Surpassed rugged
industry standards All Land Pride cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Tractor horsepower range
3-point (2596 Model = 50 - 110 hp) & (2510 Model = 60 - 110 hp)
Pull-type (2596 Model = 30 - 110 hp) & (2510 Model = 50 - 110 hp)
540 or 1000 rpm Fits wider variety of tractors. (RCR2596 is 540 rpm only)
Gearbox horsepower rating 120 Horsepower on splitter gearbox and 60 hp on outboard gearboxes.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Splined rubber flex- couplers
between the center and
outboard gearboxes
Protects the driveline and gearboxes from hard objects in the blade path.
Constant velocity u-Joint
option on RCR2510 &
RCRM2510 pull-type
Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection
on main driveline
Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
3-Point or pull-type
Pull-type fits older tractors without a top link or smaller tractors without enough lift capacity.
(RCR2596 3-point: Cat. 1 & 2) (RCR2510 & RCRM2510 3-point: Cat. 2 & 3)
High productive cutting width
RCR2596 cuts 8'-0" width.
RCR2510 & RCRM2510 cuts 9'-10" width.
Fully welded 10 gauge deck
Fully welded deck adds rigidity.
3/16" Sidewall thickness
Protects sidewalls from thrown objects.
Obstacle free underside
Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design
Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Dual leveling rods
on pull-type
Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber shield option
Reduces flying debris.
Full length skids with
replaceable shoes
Adds reinforcement to side panels. Replaceable shoes allows for change before wearing
through to weld-on piece.
Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.
3/16" Round stump jumper
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
1" x 4" Blade bar
Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2" x 4" Heat-treated blades
Heat-treated blades last longer than non-heat-treated blades.
1 1/2" Dia. cutting capacity
Aids in cutting brush.
High blade tip speed
RCR2596 (540 rpm) = 14,792 FPM
RCR2510 (540 rpm) = 17,749 FPM
Means cleaner cutting of material.
RCRM2510 (1000 rpm) = 18,035 FPM
Laminated tires
Laminated tires can handle almost any condition.
Airplane tires (Pull-type only)
Airplane tires offer smooth road-ability.
Fits Land Pride Quick-Hitch
Allows for quick and easy one person hook-up.
Section 7: Features and Benefits