Land Pride RCFM4014 Operator'S Manual Download Page 8

Page: 8 / 52

Important Safety Information

Table of Contents

RCFM4014 Rotary Cutter 326-730M

8/11/14

Safety Labels

Your Rotary Cutter comes equipped with all safety labels in

place. They were designed to help you safely operate your

implement. Read and follow their directions.
1. Keep all safety labels clean and legible.

2. Refer to this section for proper label placement. Replace

all damaged or missing labels. Order new labels from your

nearest Land Pride dealer. To find your nearest dealer,

visit our dealer locator at www.landpride.com.

3. Some new equipment installed during repair requires

safety labels to be affixed to the replaced component as

specified by Land Pride. When ordering new components

make sure the correct safety labels are included in the

request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean the area where the label is to be placed.
b. Spray soapy water on the surface where the label is to

be placed.

c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card

or with a similar type straight edge.

37152

818-830C

Danger/Warning/Notice:
Safety Combo (1 - Place)

Important Safety Information

Summary of Contents for RCFM4014





















































Search results

Summary of Contents for RCFM4014

Reviews:

Related manuals for RCFM4014

Brands by name

Popular brands

Land Pride RCFM4014, Operator'S Manual

Search results

Summary of Contents for RCFM4014

Reviews:

Related manuals for RCFM4014

Brands by name

Popular brands