126
Rotary Cutters Folding Deck
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RC(M)5510 & RC(M)6510 Models
RC5510 & RCM5510
RC6510 & RCM6510
Min. PTO Horse Power
50
Gearbox Horsepower
250 HP Splitter
210 HP Center & Wing
250 HP Splitter
210 HP Center & Wing
(Blade spindle gearboxes are built heavier)
Gearbox Oil Capacity
5.5 Pints: Divider Gearbox
10 Pints: Center deck, LH deck & RH deck spindle gearboxes
Gear Box Lubrication
Gear Lube 80-90W EP
Cutting Capacity
4”
4 1/2"
Machine Weight
Single row chain guards, 5 Airplane tires, 540 CV main driveline & standard clevis hitch
4,957 lbs. Approx.
4,977 lbs. Approx.
Blade Tip Speed
At 540 RPM
Center Blades = 14,886 FPM
Wing Blades = 14,769 FPM
At 1000 RPM
Center Blades = 15,604 FPM
Wing Blades = 15,741 FPM
Hitch Weight
1,860 lbs.
Hitch Type
Pull Type, Self - Leveling Hitch & Clevis
Clevis Type: Standard, Up & Down Swivel
Hitch Jack
Standard
Wing Offset
Right Wing Model with weight box on left side
Cutting Width
Overall Width
Minimum Transport Width
10’-6"
11’-7”
7’-6 1/2"
Overall Length
16’-5”
Deck Height
12”
Cutting Height
2” to 14” with
Lift Hydraulics
3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics
3" x 12" hydraulic cylinder, hose & fittings
Wing Transport Protection
Wing Transport Lock Pin
Deck Material
10 gauge Top Deck and 7 gauge Bottom Deck
Side Skirt Material
Bolt-on replaceable 1/4" side
Skid Shoes
Wing Deck & Weight Box: Reversible & replaceable
Center Deck: 2 with optional mounting location on center deck
Blades - 4 (2 per Carrier)
1/2” x 4” Heat Treated Free Swinging Alloy Steel with up lift
Blade Overlap
6"
Blade Bolt
Keyed with hardened flat washer & lock nut
Stump Jumper / Blade Holder
3/16" Round dish shaped pan, reinforced with 1" x 5" x 22 3/4" blade bar
Deck Ring
Optional 1/2" x 3" fully welded
Front & Rear Guards
Optional rubber, single chain or double chain
Input Driveline
ASAE Category 5 Star Profile with constant velocity u-joint or conventional (non-cv) u-joint.
Intermediate & Wing
Drivelines
ASAE Category 4 star profile with
slip-clutch or optional Cat. 5 with slip-clutch
ASAE Category 5 star profile with
slip-clutch
Wheel Options
6” x 21” Laminated Tires or 15” Rims or
24” x 7.75” x 15”, Used Aircraft Tires with or without foam filling
Number of Wheels
5 - Wheel option: 4 on transport axle and one on wing axle
6 - Wheel option: 4 on transport axle and two on wing axle.
Transport Axle
Spring-cushioned on center transport axle
optional Walking tandem
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Colors
Standard color: Beige; Optional colors: Green or Red
330-057S continue on next page
3/05/12
