manualshive.com logo in svg

Land Pride RC5020 Series, Operator'S Manual

The Land Pride RC5020 Series Operator's Manual is a comprehensive guide that equips users with all the necessary information to operate their RC5020 model effectively. This manual is readily available for free download on our website, ensuring easy access to essential instructions and maintenance tips.

Share
Download
background image

Section 4: Options & Accessories

Table of Contents

RC(M)5020 Series 2 (S/N ) Rotary Cutter 334-437M

11/13/18

38

Safety Guard Options

DANGER

!

To avoid serious injury or death:  Rotary Cutters have the 

ability to discharge objects at high speeds; therefore, the use 

of front and rear safety guards are required with this cutter. 

Specifically, double row chain guards should be used when 

cutting along roadways and in areas where people may be 

present. Stop blade rotation if bystanders are in or around the 

area.

WARNING

!

To avoid serious injury or death:  Keep all safety guards in 

place. Rotary Cutters have the ability to discharge objects at 

high speeds. Use extreme caution when cutting in areas where 

people may be present. It is best to operate the cutter when no 

one is nearby. Stop blade rotation if someone is in or around 

the area.

Land Pride offers two types of safety guards for the 
RC5020 series 2 to best suit your application: single row 
chain guards, and double row chain guards.

•

Single row chain guards are constructed with a single 
row of hanging chain links. They can withstand harsh 
applications. 

•

Double row chain guards are constructed with two 
staggered rows of hanging chain links. The second row 
provides additional barrier for stopping thrown objects.

Part Number & Description

Single Row Chain Guards

318-439A

Front Single Row Chain Guards

318-440A

Rear Single Row Chain Guards

Double Row Chain Guards

318-482A

Front Double Row Chain Guards

318-484A

Rear Double Row Chain Guards

Hitch Options

Refer to Hitch Types on page 13:

The cutter is factory supplied with the standard clevis 
hitch. Below are other available hitch options. See 

“Hitch 

Types” 

on page 13 for complete description of hitches. 

Part Number & Description

330-225A

Standard Clevis Hitch

330-333A

Bar-Tite Hitch (Optional)

330-334A

Pintle Hitch (Optional)

330-335A

Ball Hitch (Optional)

334-045A

LP Performance Hitch (Optional)

Deck Ring Option

Land Pride offers a deck ring option for extra protection 
for the deck sheet and structure. The deck rings are 
welded to the underside of the center deck and wing 
decks to protect from bent and deflected blades caused 
by hitting obstructions.

Section 4: Options & Accessories

Blade Carrier Options

Land Pride offers two blade carrier options. A heavy duty 
diamond blade carrier option and a heavy duty diamond 
blade carrier with dishpan option. The diamond blade 
carrier can handle most cutting conditions and leave a 
cleaner cut compared to a diamond blade carrier with 
dishpan. The diamond blade carrier with dishpan option 
assists the blade carrier in passing over small tree 
stumps and other small obstructions that could damage 
the blade carrier.

Part Number & Description

334-422A

Diamond blade bar

334-421A

Diamond blade bar with dishpan

Tire & Axle Arrangement Options

Land Pride offers four different tires and two axle 
arrangements to best suit your application.

•

Laminated tires are constructed of laminated layers of 
solid rubber that will never go flat. 

•

Aircraft tires are built tough to withstand the rugged use 
a cutter receives and to provide a smoother ride when 
transporting from field to field. If they are foam filled, 
they won’t go flat. 

•

6 - Wheel axle arrangement: Four tires on transport 
axle and one on each wing axle.

•

8 - Wheel axle arrangement: Four tires on transport 
axle and two on each wing axle.

Tire Part Number & Description

814-265C

6" x 21" Laminated Tire

814-673C

6" x 26" Laminated Tire

814-449C  29" x 9" x 15" Used Aircraft Tire

without foam filling

814-287C

27" x 7.75" x 15" Used Aircraft Tire
with foam filling

Center Axle Options

Land pride offers two axle options to best suit your 
application.

•

Solid center axle with center spring suspension -
Well suited for most general cutting applications.

•

Walking tandem axle with center spring suspension -
More suited for the roadside contractor to help hold 
side hills and ditches along road sides.

Shredder Blade & Baffle Kit Options

Land Pride offers shredder blade kits and front and rear 
baffle kits for helping in shredding stalks into smaller 
pieces.

Part Number & Description

330-585A

Rear baffles (replaces rear chain guard options)

330-114A

Front baffles

334-672A

Shredder and fixed blade kit

Summary of Contents for RC5020 Series







































































Reviews:

No comments

Related manuals for RC5020 Series

Makita sg150 Translation Of The Original Instruction Manual preview
sg150
Brand: Makita Pages: 372
Makita EK7650H Technical Information preview
EK7650H
Brand: Makita Pages: 19
Makita EK7300 Instruction Manual preview
EK7300
Brand: Makita Pages: 32
Makita EK6100 Instruction Manual preview
EK6100
Brand: Makita Pages: 28
Makita 4112H Technical Information preview
4112H
Brand: Makita Pages: 11
Makita 4100NH Original Instructions Manual preview
4100NH
Brand: Makita Pages: 24
Efco DS 2200 Operator'S Instruction Manual preview
DS 2200
Brand: Efco Pages: 100
Huskie Tools REC-50M Operation Manual preview
REC-50M
Brand: Huskie Tools Pages: 16
LawnMaster PBT4346T Translation Of The Original Instructions For Use preview
PBT4346T
Brand: LawnMaster Pages: 33
RASOR SW12S Use Manual preview
SW12S
Brand: RASOR Pages: 15
Vari 432HB Instructions For Use Manual preview
432HB
Brand: Vari Pages: 18
CRAIN 290 Instructions preview
290
Brand: CRAIN Pages: 4
Rubi 54911 Manual preview
54911
Brand: Rubi Pages: 12
Amkus AMK-22 Manual preview
AMK-22
Brand: Amkus Pages: 12
Land Pride RCS3510 Operator'S Manual preview
RCS3510
Brand: Land Pride Pages: 32
SIZZIX 660425 Instruction Booklet preview
660425
Brand: SIZZIX Pages: 36
Stiga BC 500 Li 48 Operator'S Manual preview
BC 500 Li 48
Brand: Stiga Pages: 47
Univex BC18 Operator'S Manual preview
BC18
Brand: Univex Pages: 7

Brands by name

Popular brands

Load more brands