Land Pride RC4615, Operator'S Manual

Page: 44 / 68

Section 4: Options & Accessories
Table of Contents
8/22/23 RC4615 & RCM4615 Rotary Cutters 331-644M
40
Section 4: Options & Accessories
Safety Guard
DANGER
!
To avoid serious injury or death:
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front & rear safety guards is
mandatory with this cutter. Double row chain guards should
be used when cutting along roadways and in areas where
people may be present. Stop blade rotation if bystanders are in
or around the area. It is recommended that a safety shield be
placed between the operator and cutter on an open air tractor.
Land Pride offers two types of safety guards to best suit
your application: single row chain guards and double row
chain guards.
•
Single row chain guards are constructed with a single
row of hanging chain links. They can withstand harsher
applications than rubber skirts.
•
Double row chain guards are constructed with two
staggered rows of hanging chain links. The second row
provides an additional barrier for stopping thrown
objects.
Single Chain Guards
330-481A Front Single Row Chain Guards
330-493A Rear Single Row Chain Guards
Double Chain Guards
330-483A Front Dual Chain Guards
330-495A Rear Dual Chain Guards
Tire and Axle Options
Land Pride offers four different tire options and two axle
arrangements to best suit your application:
•
Laminated tires: They are constructed of laminated
layers of solid rubber that will never go flat.
•
New tires: They are available in foam filled and air
filled. Both are built tough to withstand the rugged use
a cutter receives and to provides a smoother ride when
transporting. Foam filled tires won’t go flat.
•
Used aircraft tires: They are built tough to withstand
the rugged use a cutter receives and to provide a
smoother ride when transporting.
•
6 - Wheel standard axle arrangement: Four on
transport axle and one on each wing axle.
•
8 - Wheel standard axle arrangement: Four on
transport axle and two on each wing axle.
Hitch Options
330-498A Standard Clevis Hitch
330-333A Bar-Tite Hitch (Optional)
330-335A Ball Hitch (Optional)
330-501A Pintle Hitch (Optional)
334-045A LP Performance Hitch (Optional)
The cutter is factory supplied with the standard clevis
hitch. Other optional hitches are available. See
“Hitch
Types” on page 15 for complete description of optional
hitches.