Land Pride RC4610, Operator'S Manual

Page: 44 / 68

Section 4: Options & Accessories
Table of Contents
1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:
40
Section 4: Options & Accessories
Safety Guard
DANGER
!
To avoid serious injury or death:
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front & rear safety guards is
mandatory with this cutter. Double row chain guards should
be used when cutting along roadways and in areas where
people may be present. Stop blade rotation if bystanders are in
or around the area.
WARNING
!
To avoid serious injury or death:
Keep all safety guards in place. Rotary Cutters have the
ability to discharge objects at high speeds. Use extreme
caution when cutting in areas where people may be present. It
is best to operate the cutter when no one is nearby. Stop blade
rotation if someone is in or around the area.
Land Pride offers two types of safety guards to best suit
your application: single row chain guards and double row
chain guards.
•
Single row chain guards are constructed with a single
row of hanging chain links. They can withstand harsher
applications than rubber skirts.
•
Double row chain guards are constructed with two
staggered rows of hanging chain links. The second row
provides an additional barrier for stopping thrown
objects.
Single Row Chain Guards
334-125A Front Single Row Chain Guards
334-128A Rear Single Row Chain Guards
Double Row Chain Guards
334-126A Front Dual Chain Guards
334-129A Rear Dual Chain Guards
Tire & Axle Arrangements
Land Pride offers four different tire options and two axle
arrangements to best suit your application:
•
Laminated tires: They are constructed of laminated
layers of solid rubber that will never go flat.
•
New tires: They are available in foam filled and air
filled. Both are built tough to withstand the rugged use
a cutter receives and to provide a smoother ride when
transporting. Foam filled tires won’t go flat.
•
Used aircraft tires: They are built tough to withstand
the rugged use a cutter receives and to provide a
smoother ride when transporting.
•
5- Wheel standard axle arrangement: Four on
transport axle and one on the wing axle.
•
6 - Wheel standard axle arrangement: Four on
transport axle and two on the wing axle.
Hitch Options
The cutter is factory supplied with the standard clevis
hitch. Other optional hitches are available. See
“Hitch
Types” on page 15 for complete description of optional
hitches.
330-498A Standard Clevis Hitch
330-333A Bar-Tite Hitch (Optional)
330-335A Ball Hitch (Optional)
330-501A Pintle Hitch (Optional)
334-045A LP Performance Hitch (Optional)
Selector Control Valve Kit
312-316A 2-Way Selector Control Valve Kit
Some tractors do not have enough duplex outlets to
handle the equipment connected to the tractor. Land
Pride offers the following kit for adding duplex outlets.
Refer to Figure 4-1:
This kit is for tractors needing an additional duplex outlet.
It converts the tractor’s duplex outlets into two duplex
outlets with a control valve. A selector switch on the
control valve selects which cylinder is operational with
the tractor hydraulic control lever.
Selector Control Valve Kit
Figure 4-1