background image

Table of Contents Continued

1/14/19

Parts Manual QR Locator

The QR (Quick Reference) code on the 
cover and to the left will take you to the 
Parts Manual for this equipment. 
Download the appropriate App on your 
smart phone, open the App, point your 
phone on the QR code and take a picture.

Dealer QR Locator

The QR code on the left will 
link you to available dealers 
for Land Pride products. 
Refer to Parts Manual QR 
Locator on this page for 
detailed instructions.

RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:

Table of Contents

Section 5: Maintenance & Lubrication  . . . . .  42

General Maintenance Information  . . . . . . . . . . . . . 42
Hydraulic System   . . . . . . . . . . . . . . . . . . . . . . . . . 42
Tire Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Skid Shoes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Center Skid Shoes  . . . . . . . . . . . . . . . . . . . . . . . 43
Wing Skid Shoe  . . . . . . . . . . . . . . . . . . . . . . . . . 43
Weight Box Skid Shoe  . . . . . . . . . . . . . . . . . . . . 43

Spindle Gearbox Shaft Guard  . . . . . . . . . . . . . . . . 44
Cutter Blade Maintenance  . . . . . . . . . . . . . . . . . . . 44
Drivelines With Slip Clutches . . . . . . . . . . . . . . . . . 46

Type A Clutches  . . . . . . . . . . . . . . . . . . . . . . . . . 46
Type B Clutches  . . . . . . . . . . . . . . . . . . . . . . . . . 48

Long-Term Storage  . . . . . . . . . . . . . . . . . . . . . . . . 49
Ordering Replacement Parts  . . . . . . . . . . . . . . . . . 49
Lubrication Points  . . . . . . . . . . . . . . . . . . . . . . . . . 51

Section 6: Specifications & Capacities   . . . .  58
Section 7: Features & Benefits  . . . . . . . . . . .  60
Section 8: Troubleshooting   . . . . . . . . . . . . .  61
Section 9: Torque & Tire Inflation Chart   . . .  62
Section 10: Warranty  . . . . . . . . . . . . . . . . . . .  63

Summary of Contents for RC4610





































































Reviews: