![background image](http://html2.mh-extra.com/html/land-pride/pd10-series/pd10-series_specifications-and-capacities_3513196001.webp)
63
Post Hole Diggers PTO Drive
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
Post Hole Diggers
PTO Drive
PD10 and PD15 Series Post Hole Diggers
PD10
PD15
Tractor HP Range
15 to 30 HP
20 to 40 HP
Weight Without Auger
120 lbs.
161 lbs.
Auger Length
30"
48"
Auger Flight Thickness
1/4”
Auger Pipe
2 1/2" ID
Auger Teeth
Forged, Individually Replaceable
40 Degree angle installed on flat side
50 Degree angle installed on angled side
Number of Teeth
6" - 2 teeth
9" & 12" - 4 teeth
Pilot
Cast steel, 3 drill points
Driveline
Cat. II Shearbolt
Maximum Operating PTO Speed
300 RPM
Gearbox
540 RPM 3:1 Ratio
540 RPM 3.18:1 Ratio
Gearbox Oil Capacity & Type
3.4 Pints of SAE80-90W EP oil
4.6 Pints of SAE80-90W EP oil
Output Shaft
2" O.D. Round
3-Point Hitch Cat.
Cat. I
Boom Tube
2 7/8” O.D.
Yoke Tube
2 7/8” O.D.
Options and Accessories
Auger Sizes (Options)
6”, 9”, or 12”
6”, 9”, or 12”
Auger Extensions (Accessories)
7" & 14" Extensions Available
Cat. III Torque Limiter Driveline
Not Available
Not Available
Hydraulic Down Pressure Kit
Available
Available
Storage Stand
Available
Available
317-048S continued on next page
6/23/11
PD10 = 58 5/8"
PD15 = 77 5/8"
PD10 = 70"
PD15 = 89 1/2"
PD10 = 52 1/2" w/ 12" A
u
g
e
r
PD15 = 66 1/4" w/ 12" A
u
g
e
r
PD10 = 31 1/2"
PD15 = 32"
26776