Land Pride OS1548, Operator'S Manual

Page: 60 / 66

Section 6: Specifications & Capacities
Table of Contents
OS1548 and OS1572 Overseeder (S/N ) 308-303M 11/28/18
56
Section 6: Specifications & Ca-
OS1548 & OS1572 Series
Description Specifications & Capacities
Model Numbers OS1548 OS1572
Overall width
Gauge wheel drive: 77 3/4" (1.97 m)
Rear roller drive: 60 1/2" (1.54 m)
Gauge wheel drive: 99" (2.51 m)
Rear roller drive: 81 1/2" (2.07 m)
Seeding width 51" (1.30 m) 72" (1.83 m)
Box length 48" (1.22 m) 72" (1.83 m)
Empty weight 2" (5.1 cm) Spacing
2" (5.1 cm) Spacing
3" (7.6 cm) Spacing
Wheel drive: 1290 lbs (585.1 kg)
Roller drive: 1250 lbs (567.0 kg)
Roller drive: 1220 lbs (553.4 kg)
Wheel drive: 1645 lbs (746.2 kg)
Roller drive: 1605 lbs (728.0 kg)
Roller drive: 1565 lbs (709.9 kg)
Signal lights
7 Pin connector LED
SAE J560 pin configuration
Maximum horsepower 60 hp (44.7 kw)
Driveline 540 rpm; Heavy duty construction with slip clutch protection and fully shielded
Gearbox 540 rpm input; Constructed of cast iron housing w/steel gears.
Gearbox oil Gear lube 80-90 EP
Roller chain, (knife drive) #80 Roller chain; adjustable #100 Roller chain; adjustable
Chaincase, (knife drive) Fully enclosed oil bath style chain box with drain plug and vent plug.
Chaincase oil
Shell Gadus S2 V2200 00 flowable grease
Land Pride part #821-045C (32 oz. bottle) (0.95 L)
Rotor diameter 18" (45.7 cm)
Rotor speed 400 rpm
Knife tip speed 2000 fpm (10.2 mps)
Knife depth 0"-1 1/2" (0-3.8 cm)
Knife spacing 2" or 3" (5.1 cm or 7.6 cm)
Number of knives - 5 per flange
115 knives on 2" (5.1 cm) spacing
80 knives on 3" (7.6 cm) spacing
170 knives on 2" (5.1 cm) spacing
115 knives on 3" (7.6 cm) spacing
Knife construction
Straight knives: 3/16" (5 mm) thick high carbon, heat treated steel.
Curved knives: 5/32" (4 mm) thick high carbon, heat treated steel.
Seedbox construction Water tight box with wind guarded seed splash lid.
Seedbox capacity 4 bushels (141.0 L) with paddle agitator 6 Bushels (211.4 L) with paddle agitator
Productive (3 1/2 mph) (5.6 kph) 1.5 acres (0.6 hectares)/hr. (broadcast) 2 acres (0.8 hectares)/hr. (broadcast)
Number of seed cups 7 10
Seed cup metering construction Powder metal flutes with individual clean-out handles.
Seed cup drive
Gauge wheel drive: Right-hand driven with adjustable spring loaded down float.
Rear roller drive: Rear roller driven to eliminate gauge wheels.
Seed cup agitation Chain driven paddle type agitators above seed cups.
Seed settings Wide range of calibration settings per acre (hectare) or per 1000 sq. ft. (1000 sq. m)
Gauge wheel tires 18 x 8.50 x 8 (45.7 cm x 21.6 cm x 20.3 cm) turf tires at 20 psi (137.9 kPa)
Number of packer wheels 22 31
Packer wheel construction Notched 12" (30.5 cm) dia. cast iron rollers with corrugated scraper.
Hitch
Category I: with 10" (25.4 cm) offset Category I: centered
Fits Land Pride Quick Hitch.
Optional Add-on Equipment
Small seedsbox
Bushel capacity (.95 bu.)(33.5 L) with:
•
Gauge wheel drive seed cups
•
Rear roller drive seed cups
Bushel capacity (1.36 bu)(47.9 L) with:
•
Gauge wheel drive seed cups
•
Rear roller drive seed cups
Slit seeder attachment 2" or 3" (5.1 cm or 7.6 cm) Spacing; directs seed into the slits cut by the knives.
Tines Double torsion, height and angle adjustable; individual replacement.
Front roller Full width, anti-scalping, depth control, with floating top link.