Section 6: Features & Benefits
OFM3678, OFM3690 & OFM3698 Offset Flail Mowers 333-149M
6/11/21
59
Section 6: Features & Benefits
Features & Benefits
OFM36 Series Offset Flail Mower
Features
Benefits
Multiple cutting widths
78", 90", & 98" (200, 230, & 250 cm)
Wide selection of cutting widths to meet specific applications.
Wide range of tractor horsepower
70 hp to 130 hp (52 kW to 75 kW)
Fits a large array of tractors to meet the needs of consumers, municipalities, and
landscapers.
Spring-loaded,
belt-tensioning system
Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes
maintaining proper belt tension easy, and increases belt life.
High blade cutting capacity
Hammer blade can cut up to 2" (5 cm) brush and small saplings.
Reverse rotor rotation
Brings the cut material up and over the rotor which allows it to be dispersed more evenly.
Allows material to be shredded completely.
High blade tip speed
Creates a vacuum effect, provides a clean cut, and slices through saplings with great
force.
Five drive belts
Five drive belts distributes the load evenly, which prevents the belts from jumping off the
drive when a shock load occurs.
Offsets right
The lateral arm allows the mower to be offset 49" (125 cm) to the right for a closer cut
alongside buildings, fences, and roadsides. It also allows the mower to be cutting in a
ditch with the tractor traveling along side the ditch.
Flail head can be rotated from
horizontal to 65
o
up or down
Allows mowing along banks and in ditches without putting the tractor on steep inclining
or declining surfaces.
Counter-blade (accessory)
Assist shredding material into fine particles.
Replaceable skid shoes
Prevents wear on end panels from ground contact.
Adjustable roller
Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm).
