62
Section 9: Specifications & Capacities
NTS2507, NTS2509, & NTS2511 No-Till Seeder 313-629M
3/6/18
NTS2507
,
NTS2509
, &
NTS2511
Specifications & Capacities
Model Nos.
NTS2507
NTS2509
NTS2511
Overall width
96 1/2
"
111"
138 3/4"
Seeding width (broadcast)
86
"
100"
129
"
Weight w/o & with native seedbox
3-Point
Pull type
W/o native
1,878#
2,425#
With native
2209#
2800#
W/o native
2,090#
2,728#
With native
2513#
3123#
W/o native
2,650#
3,320#
With native
3,146#
3,800#
Main frame construction
3" x 4" Tube
3-Point hitch option
Category I & II
Category II
Category II
Formed A-frame plates; Fits Land Pride Quick Hitch
Pull package option
Includes tongue, park jack, hydraulic lift cylinders, hydraulic hoses, and fittings.
Pull package hydraulic lift cylinders
Master/slave: Hitch lift cylinder 3.5" x 6", Axle lift cylinders 3.25" x 6" and 3" x 6"
Pull package tires
2 - 16" Implement recaps
4 - 16" implement recaps
Pull package tire rims
5 Bolt on 4.5" bolt circle
Pull package tongue weight
(Includes all boxes without seed)
1000 lbs
1055 lbs
1282 lbs
Grass seedbox
Small seeds seedbox
Optional: Native seedbox
Water tight construction with paddle type agitating above seed cups.
Water tight construction.
Water tight construction with agitating paddles above seed cups, and rear walk board.
Seedbox capacity:
Grass seed
Small seed
Native seed
7.5 bushels
1.7 bushels
8.5 bushels
8.8 bushels
2.0 bushels
9.8 bushels
11.3 bushels
2.6 bushels
12.7 bushels
Lift sling brackets: Grass seedbox
Small seeds seedbox
Native seedbox
Two on grass seedbox for lifting grass seedbox or complete NTS Seeder assembly.
Two on small seeds seedbox for lifting only the small seeds seedbox.
Two on native seedbox for lifting only the native seedbox.
Seedbox lids
Heavy duty lid with seed splash guard.
Individual seedbox lockouts
Spring loaded lock in/out pins for each seedbox drive.
All seeds drive sprocket with
patented lockout clutch
Spring loaded dogs in lockout clutch drives all seedboxes while traveling forward only.
Spring loaded lock in/out pin engages and disengages power all seedboxes.
Number of seed cups
Grass seed
Small seed
12
12
14
14
18
18
Seed cups:
Grass & small seed
Native seed
Fluted for accurate metering
Meter sprocket
Seed cup settings
Grass seed
Small seed
Native seed
0 to 100 Adjustment lever, 4 position seed cup door, and high/low sprocket speed.
0 to 100 Adjustment lever.
4 Sprocket speeds and 4 gearbox speed changes.
Seed cup drive
Rear roller ground drive metering with #40 roller chain,
high/low speed change sprocket, take-up idler, & seed drive shut-off pin.
Seed cup drive speeds:
Grass seed
Small seed & native seed
Standard speed change sprocket can be set for low speed or high speed.
Reduction speed change sprocket must be set for low speed only.
Speed change sprocket must be set for low speed when these seedboxes are in use.
Seed drop protection
Wind guarded
Front rollers
Two 8 5/8" diameter spiked rollers capable of angling from 0 to 18 degrees each
and mounted on 1 1/4" greasable ball bearings.
Rear packer roller
Straight 11 3/8" diameter notched cast gray iron packer rings.
Number of rear rollers
1
2
2
Rear roller mounting
Mounted on floating 1" greasable ball bearings.
Roller spikes
Constructed of replaceable 1/2" x 2" heat treated steel.
Mud scrapers
Bolt on mud scrapers on front and rear rollers.
Signal lights
7 Pin connector
LED (light-emitting diode)
SAE J560 pin configuration
Acremeter option
Digital, battery operated.
Section 9: Specifications & Capacities