manualshive.com logo in svg

Land Pride BB1560, Operator'S Manual, Page: 8 / 22

Share
Download
Land Pride BB1560 Operator'S Manual Download Page 8

 Important Safety Information

Table of Contents

9/25/18

BB1560, BB1566, BB1572, BB2560, BB2566, BB2572, BB2584, & BB2596 Fixed Bar Box Scraper 303-082M

4

Safety Labels

Your Box Scraper comes equipped with all safety labels in 

place. They were designed to help you safely operate your 

implement. Read and follow their directions.
1. Keep all safety labels clean and legible.

2. Refer to this section for proper label placement. Replace 

all damaged or missing labels. Order new labels from your 

nearest Land Pride dealer. To find your nearest dealer, 

visit our dealer locater at www.landpride.com.

3. Some new equipment installed during repair requires 

safety labels to be affixed to the replaced component as 

818-267C

Caution Avoid Injury

specified by Land Pride. When ordering new components 

make sure the correct safety labels are included in the 

request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the 

surface.

d. Squeeze out air bubbles with edge of a credit card or 

with a similar type of straight edge.

25889

37115

37115

838-615C

BB2596 Only

2" x 9" Amber Reflector (1 place)

838-614C

BB2596 Only

2" x 9" Red Reflector (2 places)

Important Safety Information

*Always follow manufacturer instructions*

*AAA Rent-All 225-291-1356*

Summary of Contents for BB1560























Reviews:

No comments