Land Pride AFM4522, Operator'S Manual

Page: 47 / 58

Section 5: Maintenance & Lubrication
Table of Contents
AFM4522 All-Flex Grooming Mower 315-360M 11/18/21
43
Driveline Shafts
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
Lubrication Points
Inner Tube of Driveline
Type of Lubrication: Wheel Bearing Grease
Disconnect Driveline from the tractor and slide apart.
Clean and coat the inner tube of the Driveline with a light
film of grease and then reassemble.
Driveline Constant Velocity Shaft
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
IMPORTANT:
Extensive lubrication must be
performed every 8 hours of operation to extend the
life of the constant velocity joint.
•
Grease constant velocity joint in a straight position
to force grease through its passages and into the
cavity. Grease should be visible around ball joints.
•
Grease fittings in the outer telescoping member,
u - joints, and driveline shields every 8 hours of
operation to prevent premature break down.
50
Hrs
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours at which
lubrication is required
Lubrication
Legend
25
Hours
8
Hours
50
Hours
12726
13667
12729
Inner
Tube
26888
Blade Spindle Bearings
Type of Lubrication: Multi-purpose Grease
Quantity = As required
25
Hours