Land Pride 7000 Series, Operator'S Manual

Page: 16 / 38

Preparation and Setup
Table of Contents
7000 Series 556-433M
9/16/20 12
Electrical Hookup
Refer to Figure 4
Plug drill electrical lead in tractor seven - pin connector. If
your tractor is not equipped with a seven - pin connector,
contact your dealer for installation.
Test the lights and signaling prior to highway movement.
Hydraulic Hose Hookup
High Pressure Fluid Hazard:
Shut down tractor before making hydraulic connections. Only
trained personnel should work with system hydraulics.
Escaping fluid u under pressure can have sufficient pressure to
penetrate the skin causing serious injury.
Use a piece of paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles when
working with hydraulic systems. If an accident occurs, seek immediate
medical attention from a physician familiar with this type of injury.
Refer to Figure 5
Land Pride hydraulic hoses have color coded handle
grips to help you hookup hoses to your tractor outlets.
Hoses that go to the same remote valve are marked with
the same color.
Color Coded Hose Handles
To distinguish hoses on the same hydraulic circuit, refer
to the symbol molded into the handle grip.
• Hoses with an extended
- cylinder symbol feed cylinder
base ends.
• Hoses with a retracted - cylinder symbol feed cylinder
rod ends.
Secure hoses and cables so that they have sufficient
slack for hitch movements, but cannot get caught
between moving parts of tractor, disk harrow or hitch.
Failure to safely route and secure hoses and cables
could result in damage requiring component
repair/replacement, and lost field time.
Clean all hydraulic couplings and hook to tractor.
Color Hydraulic Function
Black Lift (2 hoses)
Figure 4
Lighting Connector
36051
Figure 5
Color Coded Hose Handles
31733