Land Pride 3P500 Original Instructions Manual Download | Manualshive

Page: 5 / 52

background image

Table of Contents

2018-06-12

3P500, 3P500V, & 3P600



313-517M

1

Important Safety Information

Look for Safety Symbol

The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.

Be Aware of Signal Words

Signal words designate a degree or level of hazard
seriousness.

DANGER, and the color Safety Red, indicate an
imminent hazard which, if not avoided, will result in death
or serious injury. This signal word is limited to the most
extreme situations, typically for machine components
that, for functional purposes, cannot be guarded.

WARNING, and the color Safety Orange, indicate a
potential hazard which, if not avoided, could result in
death or serious injury, and includes hazards that are
exposed when guards are removed. It may also be used
to alert against unsafe practices.

CAUTION, and the color Safety Yellow, indicate a
potential hazard which, if not avoided, may result in
minor or moderate injury. It may also be used to alert
against unsafe practices.

Prepare for Emergencies



Be prepared if a fire starts



Keep a first aid kit and fire extinguisher handy.



Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.

Be Familiar with Safety Decals



Read and understand “Safety Decals” on page 5,
thoroughly.



Read all instructions noted on the decals.



Keep decals clean. Replace damaged, faded and illegible
decals.

Parts Manual QR Locator

The QR Code

®

(Quick Reference) on

the front cover and to the left will take
you to the Parts Manual for this
equipment. Download the appropriate
App on your smart phone, open the
App, point your phone on the
QR Code

®

and take a picture.

Dealer QR Locator

The QR Code

®

at left will link you to

available dealers for Land Pride
products. Refer to Parts Manual QR
Locator for detailed instructions.

«
...
3
4
5
6
7
...
»

Summary of Contents for 3P500





















































Reviews:

No comments

Related manuals for 3P500

Brand: Latchways Pages: 80

Brand: Kapriol Pages: 28

Brand: parr Pages: 20

Brand: Landoll Pages: 71

Brand: York Fitness Pages: 4

Brand: W&H Pages: 23

Brand: Bartscher Pages: 24

Brand: Tate Pages: 7

Brand: Tate Pages: 5

BioHarmonex BH4

Brand: Calivita Pages: 38

Brand: CAIRE Pages: 91

Brand: Madrigal Pages: 5

Brand: MacDon Pages: 504

Brand: Major tech Pages: 12

Brand: Quark-Elec Pages: 2

Brand: V.ORLANDI Pages: 144

Brand: Accurate Technology Pages: 10

Brand: Gage Bilt Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands