Section 6: Specifications & Capacities
AFM4211 All-Flex Grooming Mower 315-507M
3/8/23
46
Section 6:
Specifications & Capacities
AFM4211 All-Flex Grooming Mowers
Specifications & Capacities
Discharge Type
Rear
Cutting Width
11' - 1" (3.38 m)
Overall Width
11'- 3 1/2" (3.44 )
Transport Height
5' - 11 1/2" (1.82 m)
Transport Width
7'-8" (2.34m) At Mid Cutting Height
Overall Length
13'- 3" (4.04 m)Transport Position
Weight
2,040 lbs. (925.32 kg)
Tractor Horsepower
Minimum 30 horsepower (22kW) and Maximum 65 horsepower (48 kW)
Hitch
Pull Type With Adjustable Clevis and Safety Tow Chain
Tongue Support
2,200 lb. (998 kg) Capacity Screw Jack
Gearbox Support
3/8" (0.95 cm) Steel Channel
Gearboxes
540 rpm
(1)-Splitter Gearbox and (3)-Wing Gearboxes
Gearbox Lubrication
Gear Lube 80-90W EP
Gearbox Oil Capacity
3 - Wings: 3.5 pints (1.7 L)
SD Splitter: 2.125 pints (1 L) or OMNI Splitter: 2.5 pints (1.2 L)
Main Driveline (1)
Category lll Constant Velocity With Slip Clutch
Deck Drivelines (3)
Category II
Cutting Height
1" to 5 1/2" in 1/4" increments (2.54 cm to 14 cm in 0.64 cm increments)
Deck Size and Quantity
3 each at 48" (122 cm)
Deck Overlap
6" (15.2 cm)
Deck Thickness
3/16" (0.48 cm)
Anti-Scalp Roller
Front Center and Rear Outside Deck Corners
Blade Drive Belt
(1) - B-Section
Drive Belt Tensioning
Spring Loaded Idler
Blade Bearings
Sealed Ball Bearings
Blades Size and Type
3 Each Per Deck
1/4" x 2 1/2" x 16 7/8" (0.64 x 6.35 x 42.9 cm) Medium Lift Standard
Optional Blades - Low Lift, High Lift and Mulching
Blade Overlap
1 3/16" (3.02 cm)
Blade Spindle Speed
3,628 rpm
Blade Tip Speed
16,020 FPM (4 883 m/min)
Deck Tires
10 Each, Air 13" x 5", Sealant With Tapered Roller Bearings
Deck Wheel Spindles
1 1/4" (3.18 cm) With Nylon Bushings
Transport Tires
2 Each,
18" x 9.5", Sealant With Tapered Roller Bearings
Transport Locks
Automatic Transport Locks With Pull Rope Release
Wing Flex
23 Degrees Left To Right
22 Degrees Front To Back
Center Deck Flex
13 Degrees Front To Back
Hydraulic Outlets
1 Set Required
Deck Cylinders
Dual Acting
Gauge Wheel Arms
1/4" (0.63 cm) Wall Square Tubing
Turning Radius
Zero Turning Radius
Mowing Capacity
@ 2 MPH = 2.68 Acres Per Hour (3 km/h = 1.08 Hectares Per Hour)
@ 4 MPH = 5.37 Acres Per Hour (6 km/h = 2.17 Hectares Per Hour)
@ 6 MPH = 8.10 Acres Per Hour (10 km/h = 3.28 Hectares Per Hour)
8.10)Signal lights
7 Pin connector
LED
SAE J560 pin configuration
