manualshive.com logo in svg

Lancom WLC-4006, User Manual, Page: 20 / 113

Share
Download
Lancom WLC-4006 User Manual Download Page 20

LANCOM WLC

-

4006 -  LANCOM WLC

-

4025

 Chapter 2: Installation

20

EN

2 Installation

This chapter will assist you to quickly install hardware and software. First,
check the package contents and system requirements.  The device can be
installed and configured quickly and easily if all prerequisites are fulfilled.

2.1

Package content

Before beginning with the installation, please check that nothing is missing
from your package. Along with the device itself, the box should contain the
following accessories:

If anything is missing, please contact your retailer or the address stated on the
delivery slip of the unit.

2.2

System requirements

2.2.1

Configuring the LANCOM devices

Computers that connect to a LANCOM must meet the following minimum
requirements:

Operating system that supports TCP/IP, e.g. Windows Vista™,
Windows XP, Millennium Edition (Me), Windows 2000, Windows 98,
Linux, BSD Unix, Apple Mac OS, OS/2.

LANCOM 

WLC-4006

LANCOM 

WLC-4025

Cable for integrated power supply

✔

Power adapter

✔

CAT5 LAN connector cable (green connectors)

✔

✔

Connector cable for the configuration interface

✔

✔

Rubber base, 19” mounting kit

✔

LANCOM CD

✔

✔

Printed Installation Guide

✔

✔

Printed User Manual

✔

✔

Printed Reference Manual

✔

Summary of Contents for WLC-4006


















































































































Reviews:

No comments