Lancom VP-100, Manual

Page: 19 / 50

LANCOM VP - 100
쮿
Chapter 2: Basic configuration of the LANCOM VP
-
100
19
EN
왏
Registrar: The address of the registrar server at your SIP provider.
왏
Proxy: The address of the proxy server at your SIP provider.

If your provider did not give you details of a proxy address, enter the
registry server address here.

The entry of further data, e.g. outbound proxy or special ports, is only
required if your SIP provider explicitly gives you this information.
Confirm your changes with the button Submit .
2.2.5 Registering at the LANCOM VoIP Router
A LANCOM VoIP Router located in your local network can function as a SIP
proxy for the VoIP terminal equipment in the network. VoIP-capable terminal
devices such as a LANCOM VP-100 can then register locally at the LANCOM
VoIP Router. The SIP proxy handles the switching of calls to a public SIP
provider or to a VoIP PBX at a different site. Alternatively, the LANCOM VoIP
Router as a SIP gateway can perform the conversion to other telephone
networks (e.g. ISDN) itself.
Where the LANCOM VoIP Router also functions as a DHCP server in your LAN,
configuration of the LANCOM VP-100 can be very fast and convenient with the
Installation Wizard (’The Installation Wizard’
→
Page 15).
If IP address information in the LAN is not communicated by the LANCOM
VoIP Router (e.g. fixed IP addresses or a different DHCP server in the LAN),
then the corresponding SIP-user data from the LANCOM VoIP Router must be
entered into the LANCOM VP-100.
햲
To do this, access the menu 'SIP Settings' and the 'Account Settings' entry.
Enter your SIP user information as configured in the LANCOM VoIP Router.