background image

1

LANCOM Installation Guide –  Copyright

Copyright

© 2020 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved.

While the information in this manual has been compiled with great care, it may not be deemed an 
assurance of product characteristics. LANCOM Systems shall be liable only to the degree specified 
in the terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product 
and the use of its contents is subject to written authorization from LANCOM Systems. We reserve 
the right to make any alterations that arise as the result of technical development.

Windows

®

 and Microsoft

®

 are registered trademarks of Microsoft, Corp.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered 
 trademarks. All other names or descriptions used may be trademarks or registered trademarks of 
their owners. This document contains statements relating to future products and their attributes. 
LANCOM Systems reserves the right to change these without notice. No liability for technical 
errors and/or omissions.

Products from LANCOM Systems include software developed by the “OpenSSL Project” for use in 
the “OpenSSL Toolkit” (www.openssl.org).

Products from LANCOM Systems include cryptographic software written by Eric Young (eay@
cryptsoft.com).

Products from LANCOM Systems include software developed by the NetBSD Foundation, Inc. and 
its contributors.

Products from LANCOM Systems contain the LZMA SDK developed by Igor Pavlov.

This product contains separate open-source software components. These are 
subject to their own licenses, in particular the General Public License (GPL). If 
the  

respective license demands, the source files for the corresponding software 

 

components will be made available on request. Please contact us via e-mail under 

 

[email protected].

LANCOM Systems GmbH 
Adenauerstr. 20/B2 
52146 Wuerselen 
Germany

www.lancom-systems.com

Wuerselen, February 2020

Summary of Contents for R&S Unified AGPO150


















Reviews: