LANCOM 3850 UMTS
Chapter 7: Security settings
69
EN
7.4.1
Wizard for LANconfig
햲
Mark your LANCOM Router in the selection window. Select from the com-
mand bar
Extras
Setup Wizard
.
햳
Select in the selection menu the setup wizard
Configuring Firewall
and
confirm your choice with
Next
.
햴
In the following windows, select the services/protocols the rule should be
related to. Then you define the source and destination stations for this rule
and what actions will be executed when the rule will apply to a data
packet.
햵
You finally give a name to the new rule, activate it and define, whether
further rules should be observed when the rule will apply to a data packet.
햶
The wizard will inform you as soon as the entries are complete. Complete
the configuration with
Finish
.
7.4.2
Configuration under WEBconfig
Under WEBconfig it is possible to check and modify all parameters related to
the protection of the Internet access under
Configuration
Firewall / QoS
Rules
Rule Table.
7.5
The security checklist
The following checklist provides a comprehensive overview of all security set-
tings for professionals. Most of the points on this checklist are no subject of
concern in simple configurations, since these generally adequate security set-
tings are already implemented during basic configuration and by the security
wizard.
Detailed information on the security settings listed here can be found
in the reference manual.
