LANCOM 3850 UMTS
Chapter 2: Installation
25
EN
2.3.2
The back of the unit
The connections and switches of the LANCOM Wireless Router are located on
the back panel:
쐃
Connector for diversity antenna
쐇
Connection for the included power adapter
쐋
Switch with 10/100Base-Tx connectors
The LAN connectors of the LANCOM 3850 UMTS supports the Power-
over-Ethernet standard (PoE). You find further information about operat-
ing with PoE in the info box 'Power-over-Ethernet – elegant power supply
through the LAN wiring'.
쐏
USB connector (USB host)
쐄
Serial configuration port (RS 232/V.24)
쐂
Reset button
The reset button offers two basic functions—boot (restart) and reset (to the
factory settings)—which are called by pressing the button for different
lengths of time.
Some devices simply cannot be installed under lock and key. There is conse-
quently a risk that the configuration will be deleted by someone pressing the
reset button too long. With the suitable setting, the behavior of the reset but-
ton can be controlled accordingly.
Reset button
This option controls the behavior of the reset button when it is pressed:
Ignore: The button is ignored.
Configuration tool
Call
WEBconfig, Telnet
Expert configuration > Setup > Config
Reset
12 V DC
Antenna Aux
Antenna Main
ETH2
ETH1
USB
Config (COM)
쐃
쐋
쐏 쐄
쐇
쐂
쐆
