Lancom 7100 VPN Manual Download Page 16

Page: 16 / 70

LANCOM 7100 VPN – LANCOM 9100 VPN

Chapter 2: Installation

2.3

Status displays and interfaces

Meanings of the LEDs

In the following sections we will use different terms to describe the behaviour
of the LEDs:

Blinking

means, that the LED is switched on or off at regular intervals in

the respective indicated colour.

Flashing

means, that the LED lights up very briefly in the respective col-

our and stay then clearly longer (approximately 10x longer) switched off.

Inverse flashing

means the opposite. The LED lights permanently in the

respective colour and is only briefly interrupted.

Flickering

means, that the LED is switched on and off in irregular inter-

vals.

2.3.1

Front

The LANCOM Routers are equipped with the following status displays on the
front panel:

LANCOM 7100 VPN

LANCOM 9100 VPN

쐃

Power

This LED provides information on the device's operating state.

Fan

Online

Backup

Security

VPN

쐃 쐇

쐏

쐋

쐄 쐂

쐊

쐆

Off

Device switched off

Green

blinking

Self-test after power-up

Green

On (perma-
nently)

Device operational

Red/green

Blinking alter-
nately

Device insecure: Configuration password not set

Red

blinking

Time or charge limit on online connections has been
reached

Summary of Contents for 7100 VPN







































































Search results

Summary of Contents for 7100 VPN

Reviews:

Related manuals for 7100 VPN

Brands by name

Popular brands

Lancom 7100 VPN, Manual

Search results

Summary of Contents for 7100 VPN

Reviews:

Related manuals for 7100 VPN

Brands by name

Popular brands