Page 34
Check humidity monitoring
Deadly risk!
Working on open, live equipment!
• Do not operate the equipment with damp hands!
• Caution: live components!
Check switching function
Deadly risk!
Switch off operating voltage and pull out electric plug!
Risk of injury!
Prior to operation, depressurise the equipment by opening the safety valve "high pressure" (29)!
Risk of injury!
Wear protective goggles when opening safety valve „high pressure” (29)!
The air dryers must be bypassed for this operation.
• Close
shut-off valve (6)
.
• Unscrew blind cover (
78
) from the pressure
limiting valve (
38
).
• Undo connecting hose (
80
) from compressor
pressure sensor (
42
) and solenoid valve Y2
(
36
).
• Attach the test hose supplied (
81
) to com-
pressor pressure sensor (
42
) and test nipple
(
78
) of the pressure limiting valve (
38
) in
order to bypass the air dryer.
• Open safety valve "high pressure" (
29
) and
and discharge tank. Close safety valve "high
pressure" (
29
) after this.
•
Switch on operating voltage:
• after a few minutes the red signal-LED „
F
“
(
48
) illuminates on the MFR (
45
) and the sys-
tem will be shut down and
• the red Signal output-LED „
A
“ (
59
) illumi-
nates on the MFR.
•
If the humidity shut-down process is not
executed, discharge tank again by opening
safety valve "high pressure" (
29
), in order to
start a new compressor run.
•
Close safety valve "high pressure" (
29
)
again.
42
81 80 36
78
38
6
29
Restore operating status
Deadly risk!
Switch off operating voltage!
Risk of injury!
Prior to operation, depressurise the equipment by opening the safety valve "high pressure" (29)!
Risk of injury!
Wear protective goggles when opening safety valve „high pressure” (29)!
• Undo and remove test hose (
81
) from pressure limiting valve (
38
) and compressor pressure sensor (
42
).
• Screw blind cover (
78
) on the pressure limiting valve (
38
) again.
• Screw connecting hose (
80
) to solenoid valve Y2 (
36
).
• Switch on operating voltage.
Summary of Contents for RTS 1000
