background image

(1) /1PC

(2) /1PC

(3) /1PC

(4)/1PC

(7) /1PC

(6)/1PC

(8) /2PC

SIZE: 43in. x 23in.

PART LIST:

HARDWARE LIST:

Cam Lock

Screw (46PCS)

Hinge (4PCS)

Screws

(24PCS)

ASSEMBLY INSTRUCTIONS

ITEM NO.

(5) /1PC

(9) /1PC

(10) /2PC

(11) /2PC

Cam Lock 

(46PCS)

Magnetic Door

Catch (2PCS)

ADEXA DIRECT LIMITED

TOOLS REQUIRED:

Phillip’s Head Screwdriver (not included)

SIZE: 43in. x 23in.

SIZE: 24in. x 8in.

SIZE: 24in. x 21in.

SIZE: 43in. x 24in.

SIZE: 24in. x 21in.

SIZE: 24in. x 21in.

SIZE: 19in. x 12in.

SIZE: 24in. x 2in.

SIZE: 19in. x 4in.

SIZE: 23in. x 4in.

(A)

(B)

(C)

(D)

(E)

Left Side Board

Right Side Board

Top Ledge

Top Shelf

Back Board

Middle Shelf

Bottom Shelf

Cabinet Doors

Top Shelf Ledge

Base Board A

Base Board B

164WAITRS1BK

164WAITRS1WL

Summary of Contents for 164WAITRS1BK

Page 1: ...S ADEXA DIRECT LIMITED TOOLS REQUIRED Phillip s Head Screwdriver not included SIZE 43in x 23in SIZE 24in x 8in SIZE 24in x 21in SIZE 43in x 24in SIZE 24in x 21in SIZE 24in x 21in SIZE 19in x 12in SIZE 24in x 2in SIZE 19in x 4in SIZE 23in x 4in A B C D E Left Side Board Right Side Board Top Ledge Top Shelf Back Board Middle Shelf Bottom Shelf Cabinet Doors Top Shelf Ledge Base Board A Base Board B ...

Page 2: ...k nuts Dx28 into Top Ledge 3 Top Middle Bottom Shelves 4 6 7 Insert cam lock screws Ax8 into Bottom Shelf 7 Arrow on cam lock nut should face outer edge where screw will be inserted D STEP 2 D 6 7 4 3 D D D D D D D D D D D D D D D D D D D D D D D D A Lay Back Board 5 on ground Add shelves 3 4 6 7 line up cam lock D and cam lock screw A Tighten cam lock nut D with screwdriver once boards are in pla...

Page 3: ... 9 Place piece 9 onto the top shelf 4 of the waitress station use screwdriver to tighten cam locks STEP 6 Attach 2 magnetic door catches Ex2 to underside of middle shelf with screws Cx4 STEP 7 Add cam locks nuts Dx16 to base boards 10 11 Add Cam lock screws Ax8 to ends of base boards 11 STEP 8 A A A A D D D D Form a rectangle with base boards 10 11 Align cam lock nuts with cam lock screws and use ...

Page 4: ...er base board 10 parallel to the front of the waitress station STEP 10 Finally place door hinges Bx2 onto the predrilled holes in cabinet door 8x1 Use screwdriver to screw Cx4 into the predrilled holes Repeat for second door STEP 11 Turn waitress station right side up and make sure all connections are secure STEP 12 ...

Reviews: