0-100MHz
＋
0.1dB to
－
0.1dB
0-130MHz
＋
6dB to
－
0.8dB
Brightness
Color Interfere
－
50dB@5MHz
，－
45dB@10MHz
Differential
phase Error
0.1%,3.8-4.43MHz
Differential
Gain Error
0.1,3.8-4.43MHz
Largest transmit
time delay
5ns (+1ns)
Signal type
VGA signal
Connection type
RJ45 interface input
Minimum input
level positive
0.5Vp-p
Maximum input
level positive
2.0Vp-p
I/O impedance
75
Ω
Echo Wasting
－
30dB@5MHz
Largest DC
compensate
1.5V
Video
Signal
Input
Synchronous
Phase-lock
0.3V-0.4Vp-p
Signal Type
VGA Signal
Connection
Type
VGA 15HDF Interface Output
Minimum input
level positive
0.5Vp-p
Maximum input
level positive
2.0Vp-p
I/O impedance
75
Ω
Echo wasting
－
30dB@5MHz
Largest DC
compensate
＋
5Mv
－
0
Video
Signal
Output
Maximum
Level
（
600
Ω
）
+15dBm
Power Supply
Input 220V/50Hz, Output DC9V
Spec
MTTF 30000hours
◆
Notice:
In order to insure the equipment can work normally, please operate as following steps in installation, use and
maintaining: (In order to make sure the equipment work normally, please follow the directions in installation,
use and maintenance:)
1). Please insure power supply to equipment should be normally in equipment’s installation and running, to
operate after the equipment to finish initialization;( When installing and operating the device, please make sure
proper power supply first, and then do other operations after it is initialized.)
2). Please use interface defined and suited connection cable, as the transmission of signal and power should be
via special connection cable; if use un-suited connection cable maybe induce the system couldn’t work
normally, even damage the equipment;( As signal and power transfer need custom cable, please use matched
cable, unmatched cable may cause system work improperly or even damage the device.)
