7
Version 01 Lot001 - 24/06/2015
EN
TECHNICAL SPECIFICATIONS
Normal conditions of use
Power
24W
Light element
24W, E27 tubes, lifespan: 8,000 hours
Fuse
T3.15AH250V
Light intensity
10,000 Lux at 10cm
Operating temperature
10 to 35°C (moisture content: 30<H<90%)
Atmospheric pressure: 700-1060hPa
Storage and transport temperature
-20°C ~50°C (moisture content: <90%)
Atmospheric pressure: 700-1060hPa
Power supply
220-240V, 50Hz
Product classification
Class II equipment
No applied part
Not category AP / APG equipment
Mode of operation: Continuous operation.
Maximum output of radiation/ spectral radiant:
1.8W.cm-2sr-1
Location of emission aperture
Lamp Screen
Dimensions
200x85x240mm
Weight
0.5kg net
This device has been developed and manufactured in compliance with the highest safety and performance standards, including electromagnetic
compatibility standards (EMC). This device also complies with the requirements of the directive concerning medical devices 93/42/EC
FAQ
Troubleshooting
Possible causes
Solutions
No light
No current
The device may not be connected properly or your
electricity supply is faulty
Main power switch is turned off
Switch on main power switch
One side of the product is no longer working
Faulty tube
Change the tube
Tube at the end of its service life
Change the tube
The light continues to flash for 20 seconds after it has
been switched on
Tube inserted incorrectly
Replace the tube
