Lamtec F200K Series, Quick Reference

Page: 4 / 18

3
1 General Information
1 General Information
1.1 Validity of these Instructions
The devices correspond to the following directives and standards:
• DIN EN 298: 2012
• DIN EN 60730-2-5: 2015
• DIN EN 746-2: 2011
• 2014/68/EU Pressure Equipment Directive
• 2009/142/EG Gas Appliance Directive
• EU/2016/426 Gas Appliance Regulation (GAR)
• 2014/30/EU Electromagnetic Compatibility Directive
• 2014/35/EU Low Voltage Directive
• DIN EN 61508: 2011, part 2 (requirements SIL 3)
• DIN EN ISO 9001:2008 Quality Management Systems
• ISO/IEC 80079-34:2011 Potentially explosive areas - Quality Management System
(QAR)
• 2011/65/EU (RoHS2 Directive)
• UL372
Product-Identification-Number: CE-0085 BO 0005
1.2 Purpose
In single-burner and multiple-burner furnaces, the flame scanner performs a high-safety mon-
itoring of the burner flame. When the flame goes out, the safe control state’ Flame ’ is reached.
The flame scanner is mainly used in large-scale power plants, thermal power stations and
chemical plants as well as for monitoring furnaces which are operated from.
– oil
– gas
– bio-mass
– dust coal
– chemicals and other waste products