4
1
Important Information about the Manual
1
Important Information about the Manual
1.1
Purpose/Applicability of the Document
This manual allows you to use the LAMTEC Flame Monitor F152 in combination with the
LAMTEC flame scanners FFS07 or FFS08 safely and efficiently.
This manual is valid for all F152/FFS07/FFS08 in any configuration.
F152 complies with the following standards and directives:
•
DIN EN 298:2012
•
DIN EN 60730-2-5:2015
•
DIN EN 50156:2016, chapter 10.5
•
DIN EN 746-2:2011 (Industrial thermoprocessing equipment – Part 2: Safety requirements
for combustion and fuel handling systems)
•
2014/68/EU (Pressure Equipment Directive)
•
2009/142/EG (Gas Appliances Directive)
•
EU/2016/426 Gas Appliance Regulation (GAR)
•
2014/35/EU (Low Voltage Directive)
•
2014/30/EU (EMC Directive)
•
DIN EN 61508:2011, Ed.2 part 2 (SIL 3 requirements)
•
DIN EN 60730-1:2012
•
EN60079-0:2013, -15:2011, -31:2010 (Explosion protection) - FFS07 only
•
UL 372 – UL Recognized-type
•
2011/65/EU (RoHS2 Directive)
1.2
Safekeeping of the Manual
Look after the manual and all the associated documents carefully.
The manual is part of the product and must be kept safe and be accessible to personnel at all
times.
Moreover, it is important that the manual:
•
Is available when required.
•
Is kept for the entire service life of the device.
•
Is available to its next operator.
Summary of Contents for F152
