www.lamptron.com [email protected]
Lamptron CM430 Instruction Manual
Thank you for choosing LAMPTRON CM430 controller.It
is optimized for air-cooled applications.
There are 3 color version available:Blue version,Red
version and Green version.
FEATURES:
PWM control
Colorful touch display
Blue,Red,Green version for your choice
Manual/Auto control
Compatible with PWM fans and stardard fans
Alarm temperature can be adjustable
SPECIFICATION:
Dimension
148.5mm * 42.5mm * 63mm
Screen dimension
129mm * 32.5mm(wider screen)
Power output
Up to 30 watts per channel
Control channels
4 Channels(1 PWM+3 Stardard Channel)
DC Input
+12V(Standard” D” Connector)
DC Ouput
0 V - 12V DC
Compatible
PWM and Standard Fans
Color Available
Blue,Red,Green
Alarm
Alarm temperature can be adjusted
PWM Function
PWM control
（
1
st
channel
）
INSTALLATION:
Installation location:
The CM430 is designed to fit in a 5.25” bay,please use the
included screws to install it within your pc case.(Phillips
screwdriver needed and not included.)
CONNECTIONS:
1.
POWER:to 4-Pin Molex Power Connector.
2.
PWM: to PWM fans or stardard fans(Note:just 1
st
channel
offer PWM function)
3.
OUT1
～
OUT3: to standard fans
4.
TEMP0
～
TEMP3: to themal sensors.
OPERATION:
⑴
Power On/Off, long press for 3 seconds to turn it off
⑵
Start boost mode
⑶
Alarm switch
⑷
Backlight adjustment button
⑸
PWM output
⑹⑺⑻
Stardard Fan control output
⑼
Increase
⑽
Reduce
Automatic mode
Manual mode
Speed, voltage,
⑾
⑾
⑾
Percentage display
Unit display
⒁
⒂
Speed meter
Functional
⒃
area
Temperature
C/F
⒄
⒄
SETTING:
1.
Manual/Auto control
Click
to switch between auto and manual control,manual
mode was setuped as default.
2.
Backlight brightness setting
Click
to control brightness ranging 100% -- 50% -- 0%.
Power-on default is 100%. Backlight automaticly shutdown after 3
minutes in Auto Mode.
3.
Alarm On/Off setting
Click
for all the Alarm on/off.
4.
Start-boost setting
Click
to set on/off Start-boost; the default is Off.
5.
Functional area
Click
to Select fan work mode between Quiet Mode/Fullpower
mode.
for Fullpower which means 100% working ;
for Quiet
Mode which means 40%working.
6.
Operational settings for each channel
7.
Speed, voltage, Percentage display
Click
to switch in Speed/voltage/Percentage display.
8.
Alarm setting
Long press over 3 seconds
to set high or low temperature
for alarming.
Speed display
：
：
：
：
Touch Speed zone to switch between RPM(speed),%(percentage)
and V(voltage)
1.
Speed:RPM(Revolutions Per Minute)
2.
Percentage:Power output percentage
3.
Voltage:Output voltage