LAMPHUS
®
SoundAlert
TM
SASP02
100W SLIM Speaker
SKU: PSZAUDSPK002
www.online-led-store.com
Phone: 1-855-LED-ONLINE (1-855-533-6654)
Fax: (909) 575-6722
E-mail: [email protected]
Mounting Instructions:
1.
Clean the selected mounting surface area.
2.
With the speaker unit rested on a work surface, remove the Bail Strap Bracket from the main body by untightening
the Mounting Bolts for the Bracket. Be careful not to misplace the split washer, washer, and two pieces of
grommet during the disassemble process.
3.
Place the Bail Strap Bracket against the selected mounting surface, and mark the spot for at least two mounting
holes.
4.
Drill a minimum of two, 1/4” holes in the mounting surface, making sure not to damage any vital components of
the mounting surface.
5.
Proceed to secure the Bail Strap Bracket to the mounting surface by utilizing bolts larger than 1/4”.
6.
Mount the speaker back on to the Bail Strap Bracket. Below is a diagram showing the order the components
should be in.
Online LED Store S2B Inc. ©2013 All Rights Reserved
