Combustibles
Incombustibles
AZ-GD400-HL STAINLESS STEEL SOFT CLOSING FLAP LID SYSTEM
Installation instructions
Thank you for selecting our product. Before starting installation,
please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
●
Damper allows silent closing of lid.
●
Side plates for anti-pinch function.
FOR YOUR SAFE WORK AND CORRECT INSTALLATION
PARTS DESCRIPTION
●
Screws (not provided)
Choose the suitable length according to the material to be
mounted.
Recommended screw : 3mm tapping screw
・・・・・・
4 pcs
Description
Quantity
Flap lid body
1
Warning sticker
1
Cover cap
4
TOOLS NEEDED FOR INSTALLATION
DIMENSION DRAWING
CUTOUT DIMENSIONS
400
450
220
270
(
25.5
)
ZKHQIODSLVDWÛ
90°
100
10
1.5
44
167
427
+1
0
253
+1
0
167
32
4×R6 Max
18 20
(
240.5
)
ZKHQIODSLVDWÛ
Cutout : front view
Mounting screw holes
Cutout : side view
ZKHQIODSLVDWÛ
4
×
I
3.5 holes
for installation
screws
Caution
If not followed injury or damage may result.
The product is designed to function when installed vertically as shown below. Horizontal, slanted or
upside down installation
will result in improper function and may lead to injury.
To prevent the risk of the product falling and causing injury, ensure that the lid body is securely fastened to a structure
with adequate strength.
Do not disassemble nor modify any parts other than those described in this document.
Recommended ambient temperature range is 0 to 40 degrees centigrade.
The closing speed of the lid may vary according to ambient temperature .If the product is stored below zero degrees, please
store in room temperature for several hours before use.
Prohibited
Warning
Caution
Required
Meaning of symbols
1
