LaMotte TRACER pH/TDS/Salt PockeTester
TM
1766-KIT-01 Instruction
13
Storing Readings
1. After the reading is displayed press and
hold the MODE/HOLD button to store
the current reading. The meter will enter
the HOLD mode and HOLD will be
displayed. The storage location number
(1 through 25) will be displayed on the
lower display followed by the reading
being stored.
2. Press the MODE/HOLD button to exit
the HOLD mode and return to normal
operation.
3. If an attempt is made to store more than 25 readings, the stored
readings will be overwritten starting with the
fi
rst reading.
Recalling Stored Readings
NOTE: First ensure that the HOLD symbol is not displayed. If it is, exit
the HOLD function by pressing the MODE/HOLD button.
1. Press the CAL/RECALL button and then press the MODE/HOLD
button. The location number (1 through 25) will brie
fl
y appear and
then the value stored in that location will appear. The displayed units
will
fl
ash, indicating that the storage recall mode is active.
2. The last stored reading taken will be displayed
fi
rst. To advance to
the previously stored readings, press the MODE/HOLD button. The
location number is displayed
fi
rst, followed by the reading stored in
that location.
3. To exit the storage mode, press the CAL/RECALL button and the
TRACER will return to normal operation after displaying “End”.
Clearing Stored Memory
Turn the TRACER on. Press and hold the ON/OFF button for 4 seconds.
The display will brie
fl
y display “clr” when the memory is cleared.
L
2
20
10
μ
S
1563
4
HOLD
L
2
20
10
μ
S
1423
°F
72.3
2
20
10
15