LaMotte DC1500 FLUORIDE, Manual

Page: 15 / 24

15
AND ANOTHER FIRST CHOICE FIRST CHOICE
AND SO ON SECOND CHOICE SECOND CHOICE
: : : THIRD CHOICE THIRD CHOICE
: : : ANOTHER ANOTHER
LAST CHOICE AND ANOTHER AND ANOTHER
The feature called Looping Menu can be turned on and off in the Editing Menu . The
default setting is ON.
COMPUTER CONNECTION
„
OUTPUT
USB
„
COMPUTER CONNECTION
USB Type A, USB mini B, Order Cable Code 1720-01.
„
WATERLINK CONNECT 2
The meter may be interfaced with any Windows-based 64-bit computer by using
the LaMotte WaterLink Connect 2 program and a USB cable. The program will store
test information and results in a local database and allow for exporting this data to a
comma separated value (CSV) file. The meter will send the following data: name of test,
sample value, sample units, time/date stamp, and meter name. To download WaterLink
Connect 2 go to http:// softwarecenter.lamotte.com/. Select “WaterLink Connect 2
FREE Download”.
BATTERY
„
BATTERY/AC OPERATION
The meter may be operated on battery power using a USB wall adapter or USB
computer connection. If using the meter as a bench top unit, use the wall adapter if
possible to extend the battery life. The meter will remain on when the USB adapter is
used.
To charge the lithium ion battery with the wall adapter, plug the smaller end of the USB
cable (USB mini B connector) into the meter and the larger end of the USB cable (USB
type A connector) into the wall adapter. Plug the wall adapter into an AC outlet. Reinsert
the rubber USB port plug after charging. Failure to insert the USB port plug when the
meter is not connected to a computer by USB or actively charging by USB could result
in damage to internal components.
To charge the battery from a computer, plug the smaller end of the USB cable (USB
mini B connector) into the meter and the larger end of the USB cable (USB Type A
connector) into a USB port on a computer. Reinsert the USB port plug after charging.
Failure to insert the USB port plug when the meter is not connected to a computer by
USB or actively charging by USB could result in damage to internal components.
The battery icon will show no bars and flash when the unit first turns on. Then the
indicator will indicate the battery status by showing 0, 1, 2, 3, or 4 bars. It will take
6 hours to fully charge a low battery. The battery icon will flash when the battery is
charging. The battery icon will show four bars and stop flashing when it is fully charged.
The charging circuit will automatically switch to a float charge when the battery is
fully charged. The charger may remain connected. Some computers will NOT supply
power to their USB ports during standby operation. The wall adapter will charge the unit
continuously. Storing the meter above ambient room temperature will decrease the