06_
LAMONA
Appliances
Do not use the ceramic hob if the glass surface
is cracked, as electrical parts are directly beneath.
Switch off the appliance at the supply to prevent
electric shock and contact your supplier.
The hob surface remains hot after use.
DO NOT TOUCH.
The appliance is not intended to be operated
by means of an external timer or separate control
system.
Pans
We advise using receptacles with flat bottom having
the same diameter or slightly larger than that of the
hot area. Avoid overflows of liquid by reducing the
control setting as soon as boiling occurs. Do not
leave the heating elements on without receptacles
on the top or with empty pots and pans.
Controls
A
B
D
C
a.
Start sensor
b.
Sensor (-)
c.
Cooking zone selection sensor (F/R)
d.
Sensor (+)
Turn on the appliance by selecting the start sensor
A (ON/OFF), ‘_’ appears on all displays for 10
seconds. The hob will turn off if no operation is
completed within 10 seconds.
The hob can be turned off by selecting the start
sensor A (ON/OFF), a BEEP will be heard.
Select sensor D to switch on a cooking zone. Every
time sensor D is pressed, display E starts flashing
on a cooking zone (Front-Rear-Front, etc.)
Adjust the power levels to the desired cooking
power using sensors C (+) or B (-).
If sensor C (+) is selected, the display increments
from power level 1, if sensor B (-) is selected, the
display decrements from power level 9.
At the end of this operation it is possible to choose
the temperature adjustments using sensors C (+)
or B (-).
By quickly pressing sensor D when the desired
power level is reached, the display will stop flashing
and the cooking phase will start, or, if sensor D is
not pressed, cooking starts after 10 seconds.
To deactivate a cooking zone, select it using sensor
D, simultaneously press sensors C (+) and B (-), or
sensor B (-) until the display for the wanted zone
shows a 0.
Lock function:
To activate the Lock function the hob must be
on and at least one cooking zone working.
Avoid children, or people requiring supervision,
from using the hob surface by locking all functions.
Keep sensor C (+) pressed for a few seconds until
the display briefly shows the symbol ‘
□
‘ the hob will
emit a BEEP.
It is not possible to modify any hob setting if the
cooking hob is on and the Lock function is active;
only sensor A (ON/OFF) functions.
Press sensor C (+) again to deactivate the Lock
function. The display briefly shows the symbol
followed by a BEEP.
03 - Using the hob - Touch Control Ceramic Hob
Using the hob