background image

5

Instructions and Installation

1. Before using the hob

2. Safety

• 

 This appliance is for domestic cooking purposes only. It must not 

be used for other purposes, for example room heating.

General

• 

 

WARNING:

 Accessible parts may become hot during use.  

To avoid burns, children less than 8 years of age should be kept 

away unless continuously supervised. This appliance can be used  

by children aged 8 years and above, persons with reduced 

physical, sensory or mental capabilities or lack of experience 

and knowledge if they have been given supervision or instruction 

concerning use of the appliance in a safe way and understand 

the hazards involved. Children must not play with the appliance. 

Cleaning and user maintenance must not be made by children 

without supervision. This appliance is not suitable for use on any 

type of boat (offshore, inland waterway, canal boat or boat house), 

caravans or motor homes.

• 

 Servicing should be carried out only by authorised personnel. 

•  This appliance must be installed so that it can be electrically isolated 

by a switch after installation.

•  If power cable is damaged do not use hob. Replacement cable 

should be fitted by a suitably competent person.

•  Do not

 spray aerosols in the vicinity of this appliance while it is in 

operation. 

Do not

 store or use flammable liquids or items in the vicinity 

of this appliance.

•  Do not

 modify this appliance. 

•  Always

 ensure that pan bases are dry and flat before using them  

on the hob.

•  Always

 position pans over the centre of the heat zone, and turn 

the handles to a safe position so they cannot be knocked over or 

grabbed by children.

•  Make sure that you have removed all packaging, wrappings,  

stickers and films from the hob surface.

•  It is recommended that you clean the hob surface before using  

for the first time (see page 15).

Summary of Contents for LAM1551

































Reviews: