14
• Electrical Connections
IMPORTANT: ENSURE THAT THE ELECTRICITY SUPPLY IS SWITCHED
OFF BEFORE CONNECTING.
Your appliance may be connected to
fixed wiring via the use of a double pole
switched fused spur outlet with at least 3mm
contact separation, with a pilot lamp.
(See technical data for fuse rating).
We strongly recommend the appliance is
connected by a
electrician who is
a member of the N.I.C.E.I.C. or Gas Safe
Register who will comply with the I.E.E and
any local regulations.
NOTE:
The terminology ‘’DOUBLE POLE’’ means that
both the live and neutral supplies are switched
and disconnected at the same time.
The terminations labelled SUPPLY are for the
connection for the internal house wiring and the
terminations labelled LOAD are for connection
for the appliance.
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:-
Green / Yellow
Earth
Blue
Neutral
Brown
Live
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your spur box, proceed as follows;
The wire which is coloured green and yellow must be connected to the terminal which
is marked with the letter ‘E’ or by the earth symbol or coloured green or green and
yellow. The wire which is coloured blue must be connected to the terminal which is
marked with the letter ‘N’ or coloured black. The wire which is coloured brown must
be connected to the terminal which is marked with the letter ‘L’ or coloured red.
FUSE RATING:
3AMP
TECHNICAL DATA
WARNING
THIS APPLIANCE MUST BE
EARTHED
