2
IMPORTANT INFORMATION
This manual has been prepared by the manufacturer and is an integral and essential part of the product. In
the event of sale or transfer of the product, always ensure the presence of the manual as the information it
contains is addressed to the purchaser and to all those various people involved in the use and maintenance
of the product. Carefully read the instructions and information contained in this manual before operation and
maintenance of the product. The instructions contained in this instruction manual guarantee the safety of
persons and property and ensure efficient operation and a longer service life. The manufacturer declines all
responsibility for damage caused by failure to observe instructions regarding use and maintenance listed in
the instruction manual, for unauthorised modifications or non-original replacement parts. The product must
be used in accordance with the manufacturer's instructions and in compliance with European, national and
local regulations. Maintenance and repairs are operations that must be performed by qualified and licensed
personnel who must have appropriate knowledge of the product. The product must not be used close to walls
made of wood or combustible material. Hot spot installation must be performed by at least two people. Only
operate the hot spot with regulation wood pellets (refer to the ''FUEL'' chapter). Never use liquid fuels to
operate the product and to stoke the embers present. Discontinue use of the product in the event of failure
or malfunction. Any accumulated unburned pellets in the burner as a result of repeated failed ignitions must
be removed prior to next ignition. Hot spot operation can cause the handles, chimney flue, and glass surfaces
to become very hot. Only touch these parts during operation when wearing protective clothing or with
adequate aids. Inform children of the precautions to be observed during product operation and of possible
dangers. In the event of problems or misunderstanding of the instructions manual, contact your dealer.
Placing objects which cannot withstand heat on the hot spot or within the minimum required safety range is
prohibited. Do not open the door during operation or operate the hot spot with its glass broken. For product
terms, limitations and exclusions, please refer to the warranty included with the product. In order to pursue a
policy of constant product development and renewal, the manufacturer may make changes to it as deems
appropriate without notice. This document is the property of the manufacturer and cannot be disclosed in
whole or in part to any third party without the written consent of the company, which reserves all rights
according to the law.
GUIDELINES AND STANDARDS
All our products are manufactured according to
the following guidelines:
EN 14543
EN 14785
EN 60335-2-102
