Lamborghini Caloreclima GP 20, Installation And Maintenance Manual, Page: 4 / 20

GENERAL
- 2
-
INTrODUCTION
The present manual is designed for those who will use the pellet burner. You will find inside the necessary mounting, star-
ting, maintenance and safety data for the device.
We recommend to keep our instructions about the safety measures with a special responsibility.
Operations that require removal of elements should be executed only by qualified and authorized specialists.
The remedial actions and settings which are not described in the manual, should not be executed.
APPLICATION fIELD
The pellet burner is created for burning pellets from wooden fragments.
It is installed in special boilers or adjusted ones, used to work with another type of fuel.
TECHNICAL DATA
DESCRIPTION GP 20
Fuel wooden pellets 6-12mm
Indulgence power 10-20 Kw
For boilers with burning area up to 3m
2
(heat-exchanging surface)
Fuel tank not a part of the delivery
Fuel feeding outside auger transporter, included into the burner set
Tracking the burning process photo-, heating and positioning sensors
Light signalization for the burner performance
Controlling
microprocessor
Ignition automatic
Possibility for adjusting the outgoing power in wide limits
Net connecting
220 – 240 V
Ignition electricity up to 4,5 A
Consumed average power below 100 W
Burner weight 16 kg
Auger transporter 9 kg
SAfETY
SAFETY RULES
Before starting the burner it is necessary to know in details all regulations of the hereby manual.
It is needed to keep all common rules for the safety when working with heating-technical devices.
•
The boiler premises where the equipment will be installed, must respond to all the fire requirements according to the
current standards and lows.
•
The device should be placed a in way, so there will be enough space for cleaning, removing the soot from the burner,
the boiler and the draught pipes.
•
The burner must be installed in the boiler outlet with the relevant isolation.
It must be joined up with nuts. Under one of the nuts there must be put a SPECIAL T-FIGURE TIN DETAIL which is for
pushing the limit switch, INFORMING THAT THE BURNER IS INSTALLED .