Lamborghini Caloreclima ECO 14/2, Installation And Maintenance Manual, Page: 21 / 64

21
MR Auxiliary terminals
MV Suspended terminal
TC
Boiler thermostat
TR Ignition transformer
TS Safety thermostat
TMF
2nd st.modul.thermostat
VE1 1st st.solenoid valve strip
VE2 2nd st.solenoid valve terminal strip
LEGEND
CH Counter (possible)
F Fuse
FA
Interference filter
FR Photoresistor
IG Main switch
LR
Lock-out lamp (possible)
MB Burner motor
MMS Air servocontrol terminal
MPE
Control box (Landis)
NOTE - Do not invert PHASE-NEUTRAL wires.
NOTE - When operating with TMF, it is necessary to take bridge on the 3-pole connector.
36
ARBEITSKURVEN
* Nur mit der Einspritzdüse der 1. Flamme erreichbares Arbeitsfeld.
ECO 22/2
ECO 14/2
Druck in Brennkammer
Durchsatz
Druck in Brennkammer
Durchsatz
The release pushbutton on the equipment is the main component for accessing all the diagnostic functions
(activation and deactivation) as well as for releasing the control and checking device.
The release pushbutton has a multicoloured led which indicates the state of the control and checking device
during operation and when the diagnostic function is in use.
EQUIPMENT STATE INDICATORS
Description
LMO EQUIPMENT
Condition Colour sequence
Standby, other intermediate states No light
Fuel preheating “on”, waiting time 5s.max
Yellow
Ignition stage
Yellow, flashing
Correct operation
Green
Incorrect operation, current level of
flame detector below permitted minimum Green, flashing
Drop in voltage Alternating yellow red
Burner lock out
Red
Fault (see table on page 8)
Red, flashing
Stray light before burner ignition
Alternating green red
Rapid flashing for diagnostics Red, rapid flashing