lamber LP6-dy, Instruction Manual

Page: 19 / 52

CLEANING AND PREVENTIVE
MAINTENANCE
PRECAUTION AND CLEANING
INSTRUCTIONS
-
IMPORTANT : Before carrying out the
cleaning and maintenance operations,
disconnect the equipment from the mains
power supply:
Attention. Before carrying out cleaning the
inside of the machine, make sure that there are
no foreign objects that could damage the rusty
steel inside the tank. The eventual rust particles
could come from non-stainless steel dishes, from
baskets or damaged water pipes not rust-proof.
-
Follow the directions on the maitenance in
this guide;
- Wear protective clothing and gloves when
challenged elements are impregned with
clearing solution;
-
high temperatures can be reached inside
the machine (90°C). After power supply has been
removed, wait until the machine has reached
room temperature, before working on it.
- never leave tools, parts or other loose
material in or on the machine;
- Chek that there are no rusting foreign
bodies, because of the material “stainless
steel” could begin to rust. Rust particles can
come from non- stainless steel dishes or
damaged wire baskets.
-
Do not wash the machine and the area
surrounding it with fire hydrants, steam jets
of high-pressure cleaners;
-
When clearing the floor be careful not
to saturate the base of the machine, in order
to avoid a prolonged stagnation of water;
-
To clean the inside of the machine, use
a brush or a soft cloth;
-
To clean the machine do not use
abrasive cleaners;
-
BEFORE starting machine or cycle, after
any maintenance or repair work, make sure
all protectives are correctly installed;
DAILY MAINTENANCE
-
Turn off the machine by pressing the
switch “A” and drain the water from
the tank by removing the overflow;
Please pay attention to the opening and
closing of the door of the machie. Do not use the
machine if you are wearing clothes/items that
could get entangles in the dishwasher parts. As
they can limit personnel’s regular moving ability!
-
Wait until the water is drained and
there is no debris on the bottom of the
tank.
- Proceed to the specific operation of
daily clearing as descrbed on the next
page
- (only for machines with steam
condenser CVP-S)
Clean the filter of the
steam condenser that is placed in the upper
part of the hood;
-
If there is an extended downtime is
advisable to prevent the formation of
unpleasant odors and leave the hood
raised.
- When the machine is to remain idle for a
long time, drain all the water from the
boiler (the drain plug is located on the
lower side of the boiler) and from the
electropump. Also leave the wash tank
open.
NEVER WASH THE EXTERNAL PART
OF THE MACHINE WITH A WATER JET