3
EN
CZ
CZ
CZ
CZ
CZ
CZ
CZ
3. ASSEMBLING AND FOLDING THE SCOOTER
a) Assembly (we recommend that two people do this)
1. Carefully remove the scooter from the box, place it on the ground and flip out the kickstand. Move
the handlebar post to an upright position and fasten it by pushing the folding mechanism towards
the handlebar post.
2. Connect both cables to the handlebars so that the arrows on the cables face each other, and then
slide the handlebars onto the post.
3. Finally, fasten both parts using the four screws and the Allen key supplied.
b) Folding
1. Push the lock of the folding mechanism upwards and release it by pulling it away from the handle-
bar post.
2. Fold the handlebar post towards the rear fender.
3. Then clip the handlebar hook to the catch on the rear fender.
4. MULTIFUNCTION DISPLAY/CONTROL
Ｓ
Power
–
Press the
POWER
button
to turn the scooter on.
–
Hold the
POWER
button
for five seconds to turn the scooter off.
LED headlight
–
When the scooter is switched on, press the
POWER
button
to
turn the
LED headlight
and
LED side lights
on/off. The
LED
headlight
must always be switched on when riding in reduced
visibility and at night.
Ｓ
Speed modes
–
Double-tap to toggle between
riding modes
Ｓ
.
Red = sport mode
Green = ECO (power saving) mode
–
Selecting ECO mode improves range and reduces battery load.
