Lamax Electronics W9.1, User Manual

Page: 8 / 61

7
8. WIFI – MOBILE APP
APPLICATION
B A C D
The mobile app enables you to change camera modes and settings, or view and download videos and photos
directly to your mobile device.
A
Scan the QR code to download the app or click the following link:
https://www.lamax-electronics.com/w91/app/
B
Install the app on your mobile device.
C Turn on the camera WiFi by pressing the POWER button or by touching the „WiFi“ icon, which you can find
by touching on the icon .
D On your mobile device, connect to the WiFi network named after the camera. The WiFi password is shown
on the camera display (default: 1234567890).
9. WATER RESISTANCE
Resistance when immersed in water under the following conditions:
ACTION CAMERA:
The camera without the case can resist immersion to a depth of 12 metres. Before immersion, make sure that
the covers on the side and bottom of the camera are properly closed. Covers and seals must be free from any
impurities such as dust, sand and alike. Do not open camera covers before the camera body is dry. If used in salt
water, rinse the camera with drinking water. Do not use any fabrics or external heat sources (hairdryer, micro-
wave oven, etc.) to dry, always allow the camera to dry gradually.
WATERPROOF CASE:
The case can resist immersion to a depth of 40 metres. Before using the camera in the case, make sure that
the rear door of the case is properly closed using the mechanism on the top of the case. The case door and seal
must be free of any impurities such as dust, sand and alike. When used in salt water, rinse the case with drinking
water. Do not use any fabrics or external heat sources (hairdryer, microwave oven, etc.) for drying, always allow
the case to dry gradually. When in the waterproof case, the touch screen of the camera display cannot be used,
and the camera must be operated using the buttons.
REMOTE CONTROL:
The remote control can resist immersion to a depth of 2 metres. Before immersion, make sure that the USB
cover on the underside of the control is properly closed. Do not open the cover before the remote control has
dried. Do not use external heat sources (hairdryer, microwave oven, etc.) for drying, allow the remote control to
dry gradually or use a small cloth.