Page 1
Using the Micro SD Card on the Model 3175:
The Model 3175 uses a micro SD card for data logging.
Note: Failure to follow the procedures below could result in SD card file corruption. All data log history will be lost
and the SD card will have to be replaced or re-formatted on a PC for data log writing to occur.
The picture below shows the location of the SD card. It is only accessible when the display panel is open.
The SD card is inserted and initialized at the factory. Follow the instructions below to remove the SD card and retrieve
the data log.
1)
Press “
CLR”
to access the main menu, then press “
7
”
SYSTEM SETUP
,
then “
8
”
EJECT SD CARD
.
MAIN MENU
2 RELAYS
1 PROCESS
3 FEED SCHEDULE
4 ALARMS
5 WATER METERS
6 4-20 MA IN/OUT
7 SYSTEM SETUP
8 CLOCK
SYSTEM SETUP
2 INITIALIZATION
3 SECURITY
4 FIRMWARE VERSION
5 DIAGNOSTICS
6 EMAIL NOTIFICATION
7 CONTROLLER NAME
8 EJECT SD CARD
2)
The micro SD card can now be removed by pressing up until the card clicks and releases from its mount.
