9. Hang the doors:
a) Insert 1 hinge screw into each
of the 3 groups of pilot holes in
one sidewall, matching the posi-
tion shown in inset A above.
Twist the screws only part way
in.
b) Hook the lower notches of the
3 door hinges over the 3 hinge
screws, as shown in inset B.
c) Secure the door by inserting 1
more hinge screw and 2 “A”
screws into each hinge, as
shown in inset C. (Note: The
notches should fit the hinge
screws very tightly.) Tighten all
of the screws securely. Repeat
for the other door.
10. Slide the adjustable shelves into place.
11. Attach a handle to the front of each door, using 2
handle screws for each handle.
Safety note
: To prevent the cabinet from tipping over, we strongly recommend that
you anchor it to a wall, using appropriate hardware for your structure.
“A”
screws
hinge
screw
A
B
C
hinge
screw
©2010 Lakeshore
DG218
(800) 428-4414
www.lakeshorelearning.com
Made in China
1. Insert 3 large pegs into the pre-drilled
holes on each side of the top, center,
and bottom shelves.
2. Hold a sidewall on its edge, as shown
at left, with hinge holes toward floor.
Position the shelves so that the pegs
match up with the holes in the sidewall,
with the finished edges against the floor
and grooves facing up (see illustration).
3. Push a shelf together with the sidewall.
Insert 2 barrel nuts into the pilot holes
on the bottom of the shelf, closest to
the sidewall. Turn each barrel nut so
that its hole aligns with the bolt hole in
the edge of the shelf, as shown in the
inset at left. Then, use the Allen wrench
and 2 long bolts to secure the shelf.
Repeat with the other two shelves.
(top s
helf)
(cen
ter
shel
f)
(bo
tto
m
she
lf)
finished
edges
pilot
holes
barrel
nuts
barrel
nuts
hinge
holes
large
pegs
long
bolt
Heavy-Duty Locking Storage Cabinet
Your new storage cabinet is simple to assemble. You’ll need a Phillips screwdriver and a rubber mallet; we’ve
provided all the other hardware and tools. You can assemble the cabinet on your own, but it will be easier if
you have another adult assist you. Use the pictures below to identify the contents before you begin.
Assembly Instructions
What’s Included
sidewalls (2)
doors (2)
top shelf
brace
boards (2)
center shelf bottom shelf
adjustable
shelves (3)
left
right
upper
lower
handle screws (4)
Hardware
“A” screws (30)
handles (2)
lock catch (2)
Allen wrench
small pegs (14)
large pegs (26)
hinges (6)
keys (4)
back panels (2)
shelf brackets (12)
kick plates (2)
barrel nuts (20)
WARNING:
ADULT ASSEMBLY REQUIRED—
This product
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpacking and assembling this product.
magnetic catch
screws (4)
magnetic
catch (2)
long bolts (20)
hinge screws (24)
lock catch
screws (6)
