Page 1: ......
Page 2: ...s Install 4 6 bolts through the table cleats as shown in Figure 2 Then install legs with washers and nuts as shown in Figure 3 Figure 3 4 Ea Legs Washers nuts Attach bench rails with 6 bolts nuts washers as show in Figure 4 6 6 Figure 4 STEP 3 STEP 2 STEP 1 6 Bolts NOTE Cracks or Checks in logs are part of the natural beauty of cedar logs and should not be considered defects 1 Table Top 2 Ea Bench...
Page 3: ...rails with a 5 lag screw as shown in Figure 8 If necessary adjust bench rails to allow the bolts to drop into the holes of the bench Tighten all nuts screws and lag screws firmly until pieces are tight to gether Your table is now ready for use If you have any hardware left over after completing your unit it most likely has been assembled incorrectly and may not be safe to use Please call customer ...
