Lake Shore 350, User Manual

Page: 173 / 192

7.1 General 159
|
www.lakeshore.com
Chapter 7: Options and
Accessories
7.1 General
This chapter provides information on the models, options, and accessories available
for the Model 350 temperature controller.
7.2 Models
The list of Model 350 model numbers is provided as follows:
Model description
Model Description of Models
350 Standard temperature controller. 4 RTD inputs and 4 control outputs
Power configurations—the instrument is configured at the factory for customer-
selected power as follows:
Power configurations
1 100 V-US (NEMA 5-15)
2 120 V-US (NEMA 5-15)
3 220 V-EU (CEE 717)
4 240 V-EU (CEE 717)
5 240 V-UK (BS 1363)
6 240 V-Swiss (SEV 1011)
7 220 V-China (GB 1002)
Options
The Model 350 includes an expansion port for various input option cards that provide
additional sensor reading capabilities. Currently the following input option cards are
available.
Model description
Model Description of Options
3060 Dual thermocouple input option card. Adds 2 thermocouple inputs to the Model 350
3061 Capacitance input option card. Adds one capacitive sensor input to the Model 350
3062 Diode/RTD expansion input option card. Adds 4 scanned diode/RTD inputs to the Model 350
7.3 Accessories
Accessories are devices that perform a secondary duty as an aid or refinement to the
primary unit. Refer to the Lake Shore Temperature Measurement and Control Catalog
for details. A list of accessories available for the Model 350 is as follows:
TABLE 7-1
TABLE 7-2
TABLE 7-3
Model Description of Accessories
106-009* † Heater Output Connector. Dual banana jack for heater output.
G-106-233* † Sensor Input Mating Connector. 6-pin DIN plug; 4 included
G-106-755* † Terminal Block Mating Connector. 10-pin terminal block for relays and Outputs 3 and 4.
115-006* † Detachable 120 VAC Line Cord.
MAN-350* † Model 350 Temperature Controller User's Manual.
G-112-325
Sensor/Heater Cable Assembly—10 Feet. Cable assembly for 2 sensor inputs and 1 heater out-
put. Approximately 3 m (10 ft) long. Requires 2 to use 4 sensors and 2 heaters.

Refer to FIGURE 7-1.
G-112-326
Sensor/Heater Cable Assembly —20 Feet. Cable assembly for 2 sensor inputs and 1 heater out-
put. Approximately 6 m (20 ft) long. Requires 2 to use 4 sensors and 2 heaters.

Refer to FIGURE 7-1.
6201 † IEEE-488 Cable. 1 m (3 ft) long IEEE-488 computer interface cable.
CAL-350-CERT †* Instrument calibration/recalibration with certificate.
TABLE 7-4 Accessories